Foxy Smart Soldering Iron 60W/12-24V DC 8KM8339

Foxy Smart Soldering Iron 60W/12-24V DC 8KM8339

Item number: 802128
EAN: 8596450012158

Pen-like 60W soldering iron with micro-processor regulated temperature (100–400°C), DC 12–24V powered. LED-backlit display and 3 buttons for simple controls. Adjustable working temperature, temperature compensation (offset) and smart standby mode for energy saving. Replacable tip, grounded to protect from electrostatic shocks.

Rod soldering iron 600W with microprocessor temperature control (100-400 °C) with power supply 12-24V DC. Compact soldering iron for fine and precise work at home in the workshop and at the airfield, on the race track or on the water.

• Precise microprocessor temperature control of the soldering tip adjustable in the range of 100-400°C in steps of 1°C
• Adjustable temperature compensation (offset) of the soldering tip (±50°C).
• Intelligent energy-saving standby mode - after an adjustable inactivity time (1-30 minutes), the soldering tip temperature automatically drops to 100°C to save energy and extend the life of the heater. Thanks to the built-in motion sensor, all you have to do is pick up the soldering iron and the tip quickly heats up to operating temperature again.
• LED display and 2 buttons for easy iron setting.
• Interchangeable tips for easy spot work and soldering thicker wires (sold separately).
• Silicone sleeve for reliable and safe holding of the soldering iron.
• Grounded tip for protection against electrostatic discharge (you should attach the earth wire to the soldering iron handle with the screw - impedance with respect to ground <2 Ohm, voltage with respect to ground <2 mV).
• Signalling of error status on the display.
• Requires a DC power supply 12-24Vli>.
• Max. Power 17 W at 12 V/60 W at 24 V - to get the most out of the soldering iron, it is recommended to use a 24 V power supply, or a 24 V battery.

The soldering iron set contains :Smart soldering iron 60W/12-24V with tip and supply cable, stand, instruction manual.