Robbe, Hype, 029-1070, Acro Vector ARF,blue,BLS,Servos
Unfortunately no longer available archive items
Can you imagine that aircraft like a frisbee to fly through the air like? Or even sideways can turn somersaults? The Acro Vector the boundaries of flight physics are redefined ...
The model is equipped with an innovative vector control. About a servo of the forward fuselage area is pivoted laterally together with the motor. As a result, the model of the engine pulls just around the corner. The vector control is coupled via a mixer in the transmitter to the rudder. Thus, for many, completely new maneuvers conjure up the sky, enable the pilots and spectators alike in sheer amazement.
Fuselage, wing and tail are made of the best material HypoDur® 100,000 times and have high strength with minimum weight. The one-piece wing has several carbon fiber spars for reinforcement. Even the ailerons are in each case reinforced with a separate carbon fiber spar to avoid twisting at a high speed. In addition to the ailerons so-called Speedfins are appropriate to enhance the effectiveness of the control ailerons on.
The horizontal stabilizer is mounted from the bottom with one screw on the fuselage. Both the tail itself and the elevator each have a carbon fiber spar.
The 2,450 kV brushless motor is powered by a 3s 11,1V LiPo battery and gives the Acro Vector a fascinating drive power. The control of the motor takes the proven SKYWALKER 40A UBEC controller made by HOBBYWING.
The control of the Acro Vector about all three axes. The ailerons are made through a separate servo, which is located in the wing. All controls are designed as gapless elastoflaps they provide maximum aerodynamic efficiency.
The model is supplied as ARF version and contains besides the five built-in micro servos and the pre-assembled drive train consisting of the brushless motor and speed controller. Due to the high degree of prefabrication, the model with just a few simple steps can be built ready to fly.
In the sky the Acro Vector then shows its full potential! By the vector control, the model can be placed in a controlled flat spin, so that it spins like a frisbee in the air. In normal flight and landing the Acro Vector behaves like a normal Hotliner. The conventional flight physics knows its limits - with the Acro Vector can go beyond all limits ...!
Technical Specifications:
- Wingspan: 1110 mm
- Length: 945 mm
- Weight approx .: 890 g
- Engine: Ø28x36mm 2,450 kV
- Battery: LiPo 3s 11.1V
- RC system: from 5 channels
features:
- Electric Hotliner with innovative vector control
- One-piece wing with numerous carbon reinforcements
- Skywalker 40A UBEC Brushless LiPo regulator of Hobbywing
- Contemporary LiPo brushless motor with high efficiency
- Fuselage, wing and tail are made of the lightweight material HypoDur®
- Tailplane with several carbon fiber spars
Designed elevator and ailerons as gapless elastoflaps -
- Ailerons Speedfins to increase the effectiveness of control
- High degree of prefabrication, thus short construction period
- Superior flight characteristics
RC functions:
- Elevator, rudder, aileron, motor vector control
Translate by computer
EUR 7,40
incl. 19% MwSt
EUR 80,90
incl. 19% MwSt