F7034 Robbe FF-10 (T10CG) - R6008 HS 2.4 GHz
Fully expanded 10- channel computer system of superior quality with integrated 2.4 GHz FASST technology.
- The FASST system is a Spread Spectrum system with frequency hopping (FHSS). It may therefore transmit a maximum power of 100 mW EIRP, giving it ample reserves even for large-scale model aircraft and jets.
- No crystals, no spot frequency selection, maximum security from same-channel interference.
- Due to Spread Spectrum modulation, frequency hopping and encoding from transmitter to receiver using more than 130 million codes, almost trouble-free.
- The central point is the large, high-resolution 160 x 72 dot graphic screen with extra-large dots for good legibility of all the settings are entered and displayed. In conjunction with four control buttons, the 3-D hotkey and the graphical user interface, the system is very easy to program.
- New precision dual-axis stick units with digital trims and variable trim increments. Make trim adjustments or store trim values when you switch model memories superfluous. The position of the trim values are displayed as a bar graph in the LCD.
- The side-mounted rotary controls provide a practical means of operating supplementary functions without letting go of the sticks.
- The transmitter is equipped with five analogue rotary controls and eight switches already fully equipped and requires no additional accessories. For almost all functions of the switches and the controls are freely selectable.
- New feature: logical switch function for switches and sticks.
- Comprehensive software provides also for functionally-oriented engine, glider and helicopter models, all necessary functions.
- Plenty of freely programmable mixers are available with 5-point curves for setting up very complex mixer functions.
- has the FASST 2.4 GHz mode the system offers a total of 10 channels (8 prop / 2 switching channels).
- The software is available in seven languages: English, German, French, Italian, Spanish, Czech and Dutch.
- Integral H3 (1:1:1) swashplate mixer for CCPM rotor head control (140 °), plus H4X for 45 ° swashplate rotation.
- Integral Trainer system with individual function transfer.
- The stick units are designed for universal mode, and can the user from "throttle right" to "throttle left" to be changed.
- 15 model memory internally, infinitely expandable by CAMPac module.
Functions
- model selection, model 15 internal memory, expandable up to 16 models per 64k CAMPac module
- Operating hours counter 0 .. 99h: 59m
- Digital operating voltage display
- Stick Mode 1 .. 4
- Function reverse throttle
- Model copy
- Trainer mode with individual function transfer and mixed sequence.
- LCD contrast adjustment
- Graphical Servoweganzeige with servo test
- User name (10 characters)
- Digital stick
Model functions
- Model name (10 characters)
- 3 separate stopwatches (one model memory-related)
- Servo reverse channel 1- 8
- Fail-safe (channels 1-8), PCM and FASST only
- Mixer select menus for powered flight, gliders and helicopters
Channel travel adjustment - 1- 8 (ATV / EPA)
- Reset
- Trimmwegeinstellung and trim memory
- Idle trim with polarity reversal (ATL)
- Free choice of transmitter controls for channel 5 .. 10
- modulation switching FM/PCM1024
- Servo center adjustment (channel 1-8)
- 3 logic switches (switch and / or stick)
Basis functions
- 4 x 3-point programmable mixers, with / without trim and offset
- 4 x 5-point programmable mixers, with / without trim and offset (helicopter only 2x)
- 3 x switching control travel (D / R)
- 3 x Exponential function, EXP (acro x 4)
Power models (Acro)
- flaperon - mixer with differential and separate end-point adjustment
- flaperon - trim (flaperon mixer value)
- 2nd mixer Ailerons with differential output to channel 5 or 6
- Air-Brake (ailerons as Wölb- /Bremsklappen)
- Elevator -> flaperon
- V-tail mixer (V-tail)
- Delta - mixer (Elevon)
- Separate elevators as ailerons (ailvator)
- 4 x snap-roll (cross-page-height)
- Idle (high idle)
- Speed adjustment for throttle servo
- Mixture adjustment with 5-point curve and speed adjustment
- Throttle cut
- Setting Idle 2
- Gyro gain set
Gliders (two servos)
- flaperon - mixer with differential and separate end-point adjustment
- flaperon - trim (flaperon mixer value)
- 2nd mixer Ailerons with differential output to channel 5 or 7
- Butterfly for ailerons and camber / landing flaps, with offset and delay for elevator function.
- Butterfly with offset-Spoiler Mix
- Wölbklappenmischer (aileron, flap, height with delay)
- Mixing aileron- flap
- mixer cross-site
- mixer Elevator -> flaperon
- V-tail mixer (V-tail)
- Delta - mixer (Elevon)
- Trim the Start menu and speed for aileron, camber, and level with trim function
- Engine shutdown
Gliders (four servos)
- Flap - trim (camber-value mixer / landing flaps)
- 2nd mixer Ailerons with differential output to channel 5 or 7
- Butterfly for ailerons and camber / landing flaps, with offset and delay for elevator function
- Butterfly with offset-Spoiler Mix
- Wölbklappenmischer (aileron, flap, height with delay)
- Mixing aileron- flap
- mixer cross-site
- Elevator -> camber / flaps
- V-tail mixer (V-tail)
- camber / flap -> aileron
- Aileron -> camber / flaps
- Trim and Speed Start menu for ailerons, camber and elevator with trim function
- Engine shutdown
Helicopter models
- Swashplate mixer, H1, H3, HR3, HN3, HE3, H4, H4X (45 °)
- Taumelscheibenwegeinstellung (AFR - roll, pitch, pitch)
- 7-point throttle curve, normal, idle-up 1, 2 and 3 with delay
- 7-point pitch curve, normal, idle-up 1, 2, 3, and Throttle
- Revo - Mix with 5-point curve, normal, idle-up 1 and 2, 3
- Swashplate mixer gas
- Tail-gas mixer
- Gyro gain set:
- Standard with three rates 0th .. 100%
- GY with three rates 0th .. + / - 100% (normal / AVCS), flight mode depending
- setup for Governor (speed controller), depending on flight condition
- Throttle trim hover
- Pitch Trim hover
- Auto-rotation with tail rotor offset
- 2-fold offset mixer for roll, pitch and tail function
- Delay setting for the tail function in H1 also for roll and pitch function
- Mixture adjustment with 5-point curve for three flight modes
- Engine shutdown
- Swashplate ring mixer
Delivery
- 1 Channel 2.4GHz FASST T10CG
- 1 Transmitter battery, 9.6 volts 2000 mAh
- 1 FASST Receiver R 6008HS
- 1 Transmitter Charger R 1415
- 1 Empfägerakkuladekabel F 1416
- 1 1-point shoulder belts
- 1 Switch harness with charge socket
Frequency Band: 2.4 GHz ... 2.4835
Output power: 90 mW
Transmission system: FSK
Weight: 990 g
Channel spacing: 2048 kHz
More Specifications: Compatible with receivers R6004FF, R6007SP, R606FS, R6106HF / C, R6107SP, R607FS, R617FS, R608FS, R6008HS, R6108SB, and R6014FS R6014HS.
Dimensions: 180 x 175 x 70mm
Functions: 20/10 Servos
Power Source: 9.6 Volt NiMH Battery
EUR 13,95
incl. 19% MwSt
EUR 1,20
incl. 19% MwSt
EUR 59,00
incl. 19% MwSt