Robbe 8884 HUB-4 lead with high-current connector

Robbe 8884 HUB-4 lead with high-current connector

A 4-way distribution unit for th eS-BUS system with 50 cm long connection to S-BUS receiver.

High-power servos are connected directly to the HUB-4, and draw power from it. Relatively small servos with low current drain are connected directly to the receiver.

The output features two HUB-2 or HUB-3 leads for the wings; elevator and rudder servos are connected using another long HUB- 2 lead.
Other S-BUS consumer units, such as nosewheel steering and tow- release servos, can be connected to the remaining socket.
Power can be drawn via the 8 A switch harness, a limiter or a dual power supply system.
A compact, very high-performance solution to the wiring of the S-BUS system with a continuous current capacity of 8 A (16 A peak), which is adequate for most models.

This arrangement provides spatial separation of the power supply system and receiver , i.e. the receiver can be installed in a position in the model favourable for radio reception - for example, under the canopy - while the remainder of the wiring remains in the fuselage.

A range of ready-made NiMH and LiPo receiver batteries is available to suit the HUB-4 S- BUS system, which are fitted with the 30 A high-current connector as standard.
Current rating: Continuous 8A, intermittent 16A.

Specification:

Dimensions: 40 x 14 x 16 mm