027-1120, Mustang P-51 m. 3X-gyro

Hype, Kyosho, 027-1120, Mustang P-51 m. 3X-gyro

BK Mustang P-51 m. X3 centrifugal 027-1120 The P-51 was from an American perspective, the most important fighter aircraft during WWII. The Mustang served as an interceptor, bomber escort and fighter bomber. With the powerful Merlin engine and the droppable fuel tanks, the P-51 was able to fly in deep in German territory.

The scale replica of the P-51D is manufactured in foamed construction of HypoDur®. Trunk-friendly dimensions, outstanding flight characteristics and unmatched attention to detail are the distinctive characteristics of our P-51D. The model is supplied with chassis and removable auxiliary tanks. The two tanks are each held by a magnet. The model can be flown with or without running gear. When used without chassis, we recommend the installation of a 2-blade propeller. The control of the model via elevator, rudder and aileron and motor control. All control surfaces are designed as a gapless elastoflaps to achieve maximum rudder effect.

A special feature of the model with the new X3 Control gyro system is equipped. The model is stabilized in flight about all three axes and held in the desired flight position. Especially in windy weather conditions the model is thereby noticeably quiet in the air!

The P-51D is prefabricated to 90%, the De-
kor is already applied to the model. All components such as servos, ESC and brushless motor are mounted already in the model. The wing is mounted with two screws on the fuselage. The drive of the P-51D is provided by a brushless outrunner with 1.300kV in direct drive. The vobildgetreue 4-blade propeller gives the model a powerful acceleration at high speeds. The control of the motor is provided by a 20A Skywalker regulator which enables a particularly sensitive control of the engine. The drive battery nVision LiPo battery 3s 11, 1V / 1.000mAh (order NVO1807) is used, which must be purchased separately.

In flight the P-51D is a class of its own! Whether leisurely pace or speed flight - the model is always safe at the helm. The X3 gyro system opens up new possibilities for spectacular aerobatics. During the landing, the model impresses with its stable flight and The Crowne control response to all rudder commands.

Specifications:

- Wingspan: 820 mm
- Length: 695 mm
- Weight approx .: 495 g
- Motor: 31x28mm 1.300kV
- Battery: LiPo 3s 11,1V
- RC system: from 4 channels

RC functions:
Elevator, rudder, aileron, motor

Features:

- Scale replica of the legendary fighter aircraft
- Standard with X3-Control 3-axis gyro system
- Contemporary LiPo brushless drive with high efficiency
- Motor and servos installed ready
- Removable auxiliary tanks with magnetic mount
- Operation with no landing gear possible
- High Vorfertigungsrad, resulting in extremely short construction time!
- Fuselage, wing and tail are made of the lightweight material HypoDur®
- All control surfaces are designed as a gapless elastoflaps
- Prototypical 4-blade propeller

Required accessories:

- 4-channel remote control system
- LiPo Battery 11.1V / 1.000mAh
or
- LiPo Battery 11.1V / 1.000mAh
- Charger for Lipo

Target audience:

Advanced & Professionals