Not available any more!!! archive items Electric Motor

CALIMA PNP HIGH PERFORMANCE GLIDER WITH 4-WING-WING AND BUILT-IN SERVOS AND DRIVE

The CALIMA is the new thermal and all-round giant at Robbe. It has various attachable wing or Tiplets and is thus slightly variable in the wingspan. It can thus be adapted to different conditions and requirements of the pilot. The pendulum elevator is simply held by magnets on the fuselage on the connector. The PNP version has already built-in servos, electrical connector and original Multilocks as wing fuse. The flight characteristics are to be described as extremely good-natured. The CALIMA can also be moved a bit faster as a slow thermal sniffer or as an all-rounder. The finished covered wings are constructed of styrofoam, fiberglass, Abachi planking and a carbon fiber reinforced spar. The ratio of weight and strength has been optimally achieved. The CALIMA is suitable for beginners, as well as for advanced model pilots.

features:
- four-piece, finished Oracover covered Styro / GfK / Abachi surface with steel insert
- Through sandwich spar (coal-pine-coal) for maximum bending stiffness
- built-in digital seal servos with ball bearings and full metal gears (PNP only)
- Complete cabling of all servos with MPX 6-pin connectors between surface and hull (PNP only)
- Completely ironed rudder flaps with mounted rudder horns
- lacquered GfK hull with built-in wooden frames and CfK reinforcements
- powerful Ro-Power 4226 570 K / V external rotor, optimized for 4S (only PNP)
- large cabin hood for convenient battery change
- already hinged rudder
- prefabricated rudder linkage with coupling parts from German production
- Finely cut servo shaft and rod covers
- anodized aluminum spinner with straight center section (PNP only)
- high strength carbon fiber propeller 14x8 "(PNP only)
- modern, well visible design

delivery
- Model CALIMA ARF, finished with Oracover covered
- painted GfK / CfK hull
- Balsa elevator with CfK / magnet connection
- Round steel connector for main wing and wing
- Ro-Power Torque 4226-570 engine installed
- 6x FS 270 MG servos installed
- Turbospinner 45mm mounted
- Folding propeller 14x8 "mounted
- Extension cable
- small parts (rudder horns, linkage, clevis, covers, etc.)
- Instructions in German / English / French

Technical specifications:
- Span: 3800/4300 mm
- Weight: ca.4700g (Passenger)
- Recommended motor: BL Outrunner
- Control: H, S, Q, M, WK
- Manufacturer: ROBBE
- Hull: GRP
- Surfaces: Styro / Abachi
- Version: F-ready model
- Rechargeable battery: 4-5S / 4000-5000mAh LiXX
- Type of drive: Electric

The product CALIMA PNP HIGH PERFORMANCE SWEEPER from ROBBE in the category Electric Gliders has a wingspan of 3800/4300 mm and a weight of ca. 4700g (aviation). The model is controlled via the functions H, S, Q, M, WK. The model is designed as an F-ready model and is suitable for advanced users. The completion of the model is easy for modelers with previous knowledge. We recommend a 4-5S / 4000-5000mAh LiXX battery for this electric flight model.

* Explanation control functions:
- H ... elevator
- S ... rudder
- Q ... ailerons
- M ... motor control
- V ... vector control
- LK ... flaps
- SK ... spoilers
- WK ... flaps
- EZFW ... retractable landing gear
- SKU ... Towing clutch
- () ... optional - control functions written in parenthesis are optionally available on the described model