FUTABA Servo BLS173SV MG BB 0,10s/7,6kg HV S.BUS2
Item no.: 01000918 P-SBL173SVI
EAN: 4513886025334
Powerful BLS HV S.BUS2 ball bearing servo for gliders, motorplanes and helicopters, with metal gearbox. Despite its slim 15 mm thickness, this servo offers an enormous power torque of 76 Ncm. Due to its linear running characteristics, it is ideally suited for swashplate control of 500...600 helicopters swashplate control of 500...600 helicopters with flybarless systems or as a flap servo for larger gliders.
Advantages of brushless motor technology:
- 30% shorter response time
- Better acceleration
- More resistant to vibration and shock
- High efficiency, thus less motor heating
- No carbon brush wear, thus 5 times longer motor service life
- Special gearbox with maximum backlash-free operation
- Cobalt-samarium motor magnets
- Highest resolution
- Same power consumption as conventional digital servos
The SVi version has a pluggable servo cable on the servo housing, which facilitates mounting and cable routing.
Programmable through S.BUS technology! Of course all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The servos can be addressed in different ways:
1. via the S.BUS receiver
2. with the handy SBC-1 programmer
3. via the PC-Link software with the USB adapter CIU-2
4. at the S.BUS connection of the transmitter
The following parameters can be configured:
- S.BUS channel assignment
- Servo reverse polarity
- Servo type (Normal / Retract)
- Soft start (On / Off)
- Mode selection in case of signal failure Hold or Free
- Soft servo run (On / Off)
- Servo position (Servo tester)
- Servo center adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39...9 seconds per 45 degrees
- Deadband adjustment (deadband)
- Servo travel adjustment left and right separately, approx. 50...175%.
- starting power
- damping
- holding force
- ID storage
Features:
- Powerful S.BUS2 digital servo with plastic gearbox
- Hi-Voltage
- Brushless motor
- Ball bearing
- Robust plastic housing
- Pluggable servo cable on servo housing
- High resolution
- High return accuracy
- Low wear potentiometer
- Water protected
Technical Data
- Operating voltage: 4.8 - 8.4 V
- Actuating speed 60° (7.4 / 6.6 V): 0.10 / 0.11 s
- actuating torque (7.4 / 6.6 V): 7.6 / 6.8 kgcm
- Control frequency: 50...300 Hz
- dimensions: 33x15x27,1 mm
- Weight: 30 g
Scope of delivery:
- 1 pc. servo BLS173SVi inclusief accessory bag
