Not available any more!!! archive items Hype, 027-1100KY, Interceptor II m. X3

Robbe, Hype, 027-1100KY, Interceptor II m. X3 gyro

The new Interceptor II has been continuously developed in order to raise the bar in terms of design and performance even higher.

Powered by a new 5.900kV brushless motor, the speed could be increased again.

Also new are the aerodynamic fairings of the aileron torque rods on the wing underside. This same time protect the articulations and the servo gear when landing in tall grass.

The additional linkage of the rudder gives the professional more ways to control the model in any attitude.

Another novelty is the standard integrated X3- control gyroscope system that stabilizes the model in flight about all three axes. You can feel how the model engages and is held in the desired flight position. Especially in windy weather conditions the model is thereby noticeably quiet in the air!

Last but not least we have the model donated a new look that makes the Interceptor II the ultimate eye-catcher at every airport!

The moldings of the model are made of the proven material HypoDur® and emerge from pre-painted the packaging. In addition to paint the decorations are applied already finished on Fuselage, wings and tailplane.

The drive of the model via the powerful impeller unit, which is designed for 3S LiPo batteries. Here, the brushless motor sits streamlined in the unit and is optimally cooled by the air flow. The engine management is handled by a Skywalker 40A controller made by Hobbying. A lid on the hull bottom, which also serves as a holder for the supporting surface, the unit is easily accessible for maintenance purposes. The one-piece wing features two carbon-fiber spars, which give the wing maximum strength. So the model is also in fast corners with high forces at all times at the helm.

The control of the model via elevator, rudder and ailerons. The articulation of the rudder via 4 micro servos, which are already incorporated in the finished model. All control surfaces are designed as a gapless elastoflaps.

The large canopy is held with two strong magnets on the fuselage. If we take the canopy off, so you get over the spacious hull cut comfortable on the battery and the RC components in the model.

The launch of the model is carried out with a strong throw out of his hand. The model accelerates as if on rails and shows no tendencies to break.

The Interceptor II boasts a total of the new features and its attractive price-performance ratio. Maximum fun of flying at a fair price is guaranteed since ...!

Product Details
- Enhanced version of the successful Sports Jets with numerous detailed optimizations
- As standard with X3-Control 3-axis gyro system
- Aerodynamic fairing of the aileron torque rods
- Fuselage, wings and tail unit are manufactured from HypoDur®
- Skywalker 40A LiPo brushless controller of Hobbywing
- Carbon double spars in the wing
- Control the model additionally rudder
- Contain 4 micro servos included
- Impeller unit with 5.900kV tuning brushless high-performance motor
- Removable canopy with magnetic closure
- Even higher airspeed
- Create an attractive design

Technical Specifications:
- Wingspan: 680 mm
- Length: 725 mm
- Weight approx .: 475 g
- Engine: Ø26x37mm 5.900kV
- Battery: LiPo 3s 11,1V
- RC system: from 4 channels

RC functions:

- Elevator
- Rudder
- Aileron
- Motor

Required accessories

- 4-channel remote control system
- LiPo Battery 11.1V / 1.300mAh
- Charger

Scope of supply:

- Fuselage, wings and tail unit in foamed construction
- 4 micro servos
- 5.900kV brushless electric motor
- Brushless Controller
- X3-gyro system
- Impeller unit