Pichler, C6147, Charger P6 multi 320W 12V
Now there is a new, powerful version of the tried and tested P6 multi with 4 x 80W (320W). Compared to the conventional 4 x 50W devices, this almost equals a doubling of the previous charging power. Also new: PC connection at all outputs possible as well as connection of a temperature sensor.
I am four chargers! "Or simply stated, the P6 multi is four (4!) Full-featured balancer chargers in one housing - with four independent LCD displays and the corresponding buttons (LiPo, NiMh, NiCd, LI-Fe or lead acid batteries) The device is designed for connection to a 12V power source (eg car battery) or a 220V power supply The device has two (2!) Built-in fans.
This charger has no 220V power supply installed. This makes it easier, runs significantly cooler during operation, and is therefore more durable and more powerful. As an ideal supplement to this charger we recommend the "Pichler Power Supply 350W", Order no. C4593. All types of batteries can thus be optimally charged at any time.
Large test report in the trade magazine MODELLFLIEGER 2-2013 by Ludwig Retzbach [click here]
Delivery:
- 1 x charger P6 Multi 4x80W
- 1 x Multilade cable Octopussy (suitable for almost all plug systems)
- 1 x Balancer Adapter EHR, XHR and TP
- 1 x Balancer connection cable
- Instructions (German, English)
Technical specifications:
Operating voltage: DC 11 " 15 volts
Power (charging): 4 x 80 watts
Power (unloading): 4 x 8 watts
Balancer compensation current: pulsed 0.12A / cell
Ni-CD / Ni-MH: 1 " 15 cells
LiPo / LiIo / LiFe: 1 " 6 cells
Lead Acid: 2 - 20 Volts
Charge current: 0.1 " 6.0 Ampere
Discharge current: 0.1 " 2.0 amperes
Formation cycles: 1 " 5
Battery storage: " 5
Weight: approx. 1100g
Measurements: approx. 225 x 159 x 62mm
The following custom system settings are possible:
- Voltage of lithium batteries for Li-Po (3.7V), Li-Io (3.6V) and Li-Fe (3.3V)
- sensitivity of Delta-Peak switch-off for Ni-CD / Ni-MH batteries of 1 -20mV
- Monitoring of the charging temperature from 20 - 80 ° C (at two outputs possible, temperature sensor cable optional)
- Waiting time between charge / discharge 1 - 60 min.
- Safety shutdown of the capacity to be charged from 10 - 9990mAh
- Safety time switch of the charging period from 10 to 720 minutes
- Input voltage too low, 10 to 11 volts
Optimized operating system
In the "AUTO" function, the device controls the charging / discharging currents as well as the
Number of cells automatically. The numerous safety mechanisms of this
Operate optimally together and ensure extremely high operating safety.
- High-power circuits
- Integrieter, active balancer (equalizer) for all lithium battery types
- Balancing (voltage compensation) even during the discharge of all lithium batteries
- Load programs for fast charge and storage mode (for example, over-wintering)
- Up to 5 formation cycles for the battery
- 4 backlight displays
- High quality, anodised aluminum housing and much more!
EUR 7,50
incl. 19% MwSt
EUR 999,00
incl. 19% MwSt
EUR 152,00
incl. 19% MwSt