Multiplex 35394 ROYALpro 9 2.4 GHz technology M-LINK
The ROYALpro is the remote control system for the demanding amateur pilots and experts. Also this system you get now with the new MULTIPLEX 2.4 GHz transmission technology M-LINK.
You can choose from the following options:
ROYALpro 7 7-channel version, 20 model storage
ROYALpro 9 9- channel version, 28 model storage
ROYALpro 16 16-channel version, 36 model storage
Except in the channel and model store number, all three variants offer the same options and features, as they are aware of the ROYALpro:
- Comprehensive adjustment and mixing facilities for bilities helicopter models
- Lowest programming by different model templates for surface and helicopter models
- Free function mapping for donors, switch and servos
- Up to 4 flight phases per model with phase-specific trim and Expo setting
- 3 Timers and in addition model and channel uptime
- 5 Function keys and 2 3D-Digi-Einsteller for simple, user friendly programming
- 6 Menu buttons for direct access to the main menu
- Plain text menu in different languages (DE, EN, FR, IT, ES)
- Ergonomically optimized design for handheld and console station usage
- Large, graphic-capable folding display
- Digital trim trim cross, flugphase-specific
- MULTIPLEX multi function socket as standard built (Senderakku load, teacher/student operation, PC interface for firmware updates, data management and simulator mode)
The new, additional benefits are:
Fully integrated 2.4 GHz M-LINK transmission technology
The new 2.4 GHz transmission technology M-LINK integrates visually appealing in the channel.
The binding modes and the power reduction for range test be activated easily and conveniently. You have to press any difficult to access keys
or interpret complex LED codes. Also setting the FAIL SAFE positions in the receiver can be done from the transmitter, by menu,.
16-Channel operation
As a special feature, the ROYALpro of 16 with the 2.4 GHz RF module offers 16 fully proportional channels to transfer HFM4 M-LINK. These are four additional channels. These
always use the full servo routes and are intended for special functions. To take advantage of the additional channels, the 16-channel receiver RX-16-DR is per M-LINK required.
Return channel/Telemetry
If you are using a telemetry-capable receiver (from RX-7-DR M-LINK or RX-9-DR M-LINK), the current voltage of the receiver power supply on the display of the channel is displayed. Below an adjustable min. voltage, an acoustic signal warns against an increasingly empty battery. Can the quality of the connection without sensor
(LQI) on the channel display in % values are displayed.
An additional safety!
Also can display up to 15 telemetry data from the model on the screen (depending on the connected sensors to the recipient, such as voltage, current, temperature, etc.)
can be (examples: Antriebsakkuspannung, engine temperature, power consumption of the drive).
Longer operating time
Due to low power consumption of the RF module.
Low latency / high resolution
As the ROYALevo or ROYALpro always has a digital interface to the RF module, not need the data as in many other 2.4 GHz retrofit - module solutions,.
the conventional ppm or PCM format to digital 2.4 GHz transmission format be implemented. Therefore is a high-speed, high-resolution and precise
Transmission of control signals possible. The M-LINK ROYALpro works with a servo cycle time of 14 ms in the 12-channel operation (or 21 ms in the 16-channel operation) in one
Resolution of 12 bit (3872 steps). Toggle normal / fast response if 14 ms for the used servos are too fast, can be set on 21 ms cycle time.
Fast conversion
If you want to use in conventional FM technology remains recipients from your inventory (PPM, M- PCM), which is not a problem. The M-LINK ROYALpro can be converted also on the airfield within a minute: the 2.4 GHz RF module HFM4 M-LINK with 2.4 GHz antenna is simply replaced by the existing FM RF module and the long transmitter antenna.
Large graphic LC display
- 132 x 64 pixel, clear presentation of all information
- Contrast in the menu can be set
- UV stable and anti-reflective
- Folding (angle 0 ° / 20 ° / 40 °)
- Optimum angle for any application!
Comprehensive basic configuration Griffgünstig ordered
- 2 Switches, 2-stage
- 2 Switches, 3-tier
- 2 Switch on the side, 3-stage
- 2 Button on the side
Precision billet aggregates
- Ball bearings
- Latching or friction right or left simply to activate (for gas, spoiler or pitch)
- Rubber of cudgel (neutralization) adjustable
- Ergonomisc
EUR 6,00
incl. 19% MwSt
EUR 570,00
incl. 19% MwSt
EUR 40,95
incl. 19% MwSt