F3031 T3GR 2.4 GHZ 3/3/0

Robbe F3031 T3GR 2.4 GHz 3/3/0

3-channel computer system with joysticks for RC car and racing boat operators, exploiting 2.4 GHz FASST technology. Ideal for controlling regatta sailboats.

- No crystals, no spot frequency selection, no co-channel interference are the main advantages of the FASST technology.
- Due to Spread Spectrum modulation, frequency hopping and encoding from transmitter to receiver, with over 4.2 billion codes, virtually trouble free.

- A detailed description of the system advantages of 2.4 GHz FASST technology please refer to the FASST introduction page.

- Modern housing design with ergonomically positioned controls and controls.

- Transmitter modulation is switchable between: (FSK)-normal speed modulation (14 ms) and HRS-FSK High Response System (4 ms), the new 3 times faster modulation. Reduce the response time of servos and controllers. (Can only be used in conjunction with digital servos.)
- Large 100-segment LCD display for easy viewing of the function settings.

- 10 model memory with model name, model copy and reset model, for easy management of different models.

- push button to adjust trims and mixing functions, even while driving
- ABS intermittent brake for optimum grip when braking in curves.

- 2 Drive Condition, by pressing a button can be, for the functions to be adjusted during a race, a second Setting recall. Thus, the vehicle can be quickly provided with a new setup.

- The receiver is identical to the FS 603 R is not a receiver diversity antenna system, and thus only one antenna.
The functions are almost identical to those of T3 Megatech AM.

Functions:
10 internal memory model
Model selection
Model Name
Copy model
Model Delete
Encoder assignment
Switch assignment
Modulationsartumschaltung FSK / FSK HRS

Second switching Drive Condition for the functions:
Speed of the steering servo
Exponential Steering
Exponential gas
ABS intermittent brake (default)
Brake mixing rate
Programmable mixers
Steering Trim
Trim Gas
Dual Rate Steering
Maximum braking distance

General:
Travel adjustment for throttle, steering and 3 Channel
Servo reverse, steering, gas, 3 Channel
Servo center adjustment
Steering servo speed setting down / back
Exponential gas brake
Exponential Steering
ABS intermittent brake, reset, cycle, delay
Gas acceleration
Mixing brake, front and / or rear brake
Braking distance setting
Programmable mixers
Fail-safe setting
Timer settings
Stopwatch asc. / Dev.
Single-lap counter with Total measurement time
Settings 3 Channel, or separate brake duct

Delivery

1 Channel 2.4GHz FASST T3GR
1 2.4 GHz FASST Receiver R 603FF
1 Switch harness hrs

Specifications

Output power: 90 mW
Transmission system: FSK / HRS-FSK
Weight: 690 g
Channel spacing: 2048 kHz
Dimensions: 210 x 180 x 60 mm
Features: 6 / 3 servos
Power supply: 9.6 to 12 volts