Uhu Endfest 300 epoxy 33G UH45640

UHU PLUS ENDFEST 300, tube binder, tube hardener 33 g UH45640

Artikelnummer: UH45640 / 806016
EAN: 4026700456400

UHU PLUS ENDFEST 300, tube binder, tube hardener 33 g
- UHU plus endfest 300
- solvent-free 2-component epoxy resin adhesive for the highest loads.
- Mixing ratio binder : hardener = volume 1:1.
- Open time (work life) approx 90 minutes.
- Hardening time and final strength vary with temperature.
- Max final strength 30 N/mm²
- Initial strength after 12 hours at room temperature
- Bond is resistant to impacts, ageing, and moisture effects

UHU plus endfest 300 is a solvent-free 2-component reactive adhesive. UHU plus endfest 300 is a universal solution, ideal for joins under extreme loading. In most cases, the mixing ratio is 1 part binder to 1 part hardener by volume. There is a limited work life after mixing. Besides its high final strength (max 30 N/mm²), the bond is characterised by very high resistance to impacts, ageing, and moisture.

Materials
Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, thermosets, GFR plastics, rigid PVC, rubber, rigid foam plastics, e.g. EPS. Not suitable for bonding large glass areas, PE, PP.

Processing
Surfaces for bonding must be dry, and free of dust and grease. Roughen smooth surfaces. Mix in the ratio 1 part binder to 1 part hardener (strands of equal length). Apply adhesive to one side, or to both sides of rough materials. Position items together accurately without pressing. Open time (work life): approx 2 hours. Hardening time and final strength vary with temperature; initial strength after about 12–24 hours at room temperature.

- Color: honey-colored
- Suitable materials: Metal, stone, concrete, porcelain, wood, glass, many plastics
- Minimum durability in months: 36
- Unsuitable materials: Polyethylene, polypropylene, Teflon®, polystyrene, soft PVC
- Viscosity: Binder 40,000 mPa-s, hardener 30,000 mPa-s
- Chemical basis: Epoxy resin
- Minimum temperature range: -40°C
- Maximum temperature range: +100°C
- Processing time (at 20°C) in min: 90
- Mixing ratio by volume: 1:1
- Hand strength in hours: 6
- Functional strength in hours: 12
- Final strength achieved after (hours): 24
- Final strength: 30 N/mm²
- Resistance: many solvents, diluted acids, diluted alkalis
- Country of origin: Germany
- Customs tariff number (HS code): 35061000

Scope of delivery:
- 1x UHU PLUS ENDFEST 300, tube of binder, tube of hardener 33g

Sicherheitsdatenblatt und technisches Merkblatt herunterladen