A50-10L Turnado V3 kv530 - Glider 97826733

Hacker 97826733 A50-10L Turnado V3 kv530 - Glider

Item number: 97826733
EAN: 4950344081493

Product description and features
The Turnado V3 Glider fits seamlessly into our range of glider nose/FES drives. Thanks to the shaft extension with integrated support bearing, this drive can also be installed in slim sail noses. The shaft can be easily moved by loosening the three M3 screws on the back. The model can be converted to a glider in no time at all. It is possible to switch between electric flight and glider towing. The shaft has a diameter of 6 mm for the use of standard prop drivers and scale spinners.

This weight-optimized high-end motor with a weight of only 507g fits perfectly in glider models from 8 kg to 12 kg.

Accessories
You will find suitable controllers, batteries and a suitable propeller in the accessories tab.

Drive suggestion:
- Propeller 12"-13”

Technical data
- Max. power in watts (max. 15 sec.) 4000
- Number of poles 10
- windings 10
- No-load current (I0) at 8.4V [A] 1.9
- Internal resistance (Ri) [Ohm] 0.015
- Wear shaft 6
- Max. speed 25000
- Recommended timing [°] 15 - 20
- Recommended clock frequency [kHz] 8
- Controller recommendation [A] (depending on setup) 90 - 120
- No-load speed per volt (kv) 530
- Max. current in amps 85
- Propeller RFM 12.5x10 RFM 13x10 RFM 16x10
- Model kg 11 12 8
- LiPo 6S 6S 4S

Dimensions and weights:
- Weight [g] 507
- Length [mm] 61
- Outer diameter [mm] 51.5
- Shaft diameter [mm] 6

Scope of delivery / equipment
- Prop driver No
- Mounting cross Yes
- Gold plug mm (recommended) 4
- Backmount mountable No
- Front mountable Yes

Scope of delivery
1x 1x A50-10L Turnado V3 kv530 and instructions.

Information on product safety:
- Manufacturer information:
Hacker Motor GmbH
Schinderstrassl 32
D 84030 Ergolding
Email: shop@hacker-motor-shop.com