Combo Set KAVAN C2826-1400 + R-20B KAV30.0112C

KAVAN Combo Set C2826-1400 + R-20B KAV30.0112C

Artikel-Nr: 800434
EAN: 8596450033665

Combo set of BLS motor with 20A ESC for model aircraft: glider 450g, trainer 450g, acro 400g, 3D 300g, KV1400 rpm per V, power supply Lixx 2-3s, shaft 3.175 mm.

DESCRIPTION AND FUNCTIONS OF THE MOTOR
The KAVAN C2826-1400 is a miniature brushless motor designed to power small models with a flying weight of up to 350 g, powered by a two or three cell Li-poly battery. With its help you can successfully "electrify" e.g. large rubber bands from Guillow's or Dumas kits with a span of approx. 800-1200 mm, it is also excellent for Dumas RC park-flyers.

Motor mounting:The C2826-1400 is designed for both front and rear mounting. For front mounting behind the motor face, use at least two (opposing) or four M3 bolts that engage the motor face within 3 - 4 mm. The pairs of holes for the fixing screws in the motor face are spaced regularly at 180° on circles of 16 and 19 mm diameter. The motor firewall should be 2 mm Birch aircraft plywood. A rear mounting kit (mounting cross, prop adaptor) is supplied with the motor.

Motor kit includes: motor C2826-1400 swith cables and with soldered 3.5 mm gold-plated connectors, rear mounting kit, manual.

Supply voltage LiXX cells: 2 - 3 ; RPM/V [RPM/min/V]: 1400 ; Max. power (30 s/3S LiPo) [W]: 120 ; No load current (2S) [mA]: 500 ; Max. peak current (30 s) [A]: 14 ; Diameter [mm]: 27.8 ; Lenght [mm]: 27 ; Shaft diameter [mm]: 3.175 ; Weight [g]: 50 ; Nr. of poles: 14 ; Timming [°]: 15 - 25 ; ESC [A] : 18 - 20 ; Sailplane up to Weight [g]: 450 ; Trainer up to Weight [g]: 450 ; Acrobat up to Weight [g]: 400 ; 3d up to Weight [g]: 300

Technical data:
- Powering LiXX cells: 2 - 3
- RPM/V [ot./min/V]: 1400
- Max. power (30 s/3S LiPo) [W]: 120
- Open-circuit current (2S) [mA]: 500
- Max. peak current (30 s) [A]: 14
- Diameter [mm]: 27.8
- Length [mm]: 27
- Shaft diameter [mm]: 3.175
- Weight [g]: 50
- Poles count: 14
- Timing [°]: 15 - 25
- ESC [A]: 18 - 20
- Weight of glider (up-to) [g]: 450
- Weight of trainer (up-to) [g]: 450
- Weight of acrobat (up-to) [g]: 400
- Weight of 3D (up-to) [g]: 300


DESCRIPTION AND FUNCTIONS OF THE ESC
- Extremely low internal resistance thanks to a new generation of power MOSFET transistors.
- Suitable for the vast majority of aircraft brushless motors powered by 2-3S LiPo/Li-ion or 5-9 cell NiCd/NiMH batteries.
- For power supply from NiCd, NiMH, LiPo, Li-ion batteries
- Linear BEC 5.0 V with load capacity up to 2 A.
- Adjustable timing for optimum adaptation to the motor.
- Adjustable voltage protection - disconnecting the motor when the supply voltage drops.
- Safe power-on (prevents the motor from starting when switched on).
- Overload protection (when the temperature reaches 110°C, the ESC limits the power).
- Automatic throttle cutoff when the control signal is lost.
- Linear throttle control.
- Easy programming and setup with the transmitter or LED programming card KAVAN R.
- Calibrate the throttle range to perfectly match the control signal from your TX.

PROGRAMMABLE FUNCTIONS OF THE ESC
- Programmable brake (Off - On).
- Optional battery type (Li-poly or NiCd/NiMH).
- Adjustable motor cutoff type when the supply voltage drops (power reduction or immediate disconnection).
- Adjustable cut-off voltage for motor disconnection - voltage protection against over-discharge of batteries (Lithium batteries: 2.85 V/cell, 3.15 V/cell, 3.3 V/cell.NiXX batteries: 0%/50%/65% of initial voltage value.)
- Adjustable soft start for motors with gearbox and helicopters in three stages: Normal (300 ms) / Soft (1.5 s) / Super Soft (3 s).

PROTECTIVE FUNCTIONS OF THE ESC
- Start-up protection: If the motor does not start within 2 seconds after the throttle is applied, the ESC disconnects the motor.
- Thermal protection: If the ESC temperature exceeds 110°C, the ESC will limit the output power.
- Signal loss protection The ESC will limit power if the signal is absent for 1 s; a signal absent for more than 2 s will cause the motor to disconnect completely.

Tip: When the first time the regulator is switched on, first calibrate the throttle range according to the instructions. Only then can the ESC be used and other parameters set using the transmitter or the KAVAN R LED programming card.

Use: Airplane,helicopter ; Type: brushless ; Current rate [A]: 20 ; Max. peak current [A]: 25 ; NiXX cells: 5 - 9 ; LiXX cells: 2 - 3 ; BEC Voltage [V]: 5 ; BEC current [A]: 2 ; Lenght [mm]: 42 ; Width [mm]: 25 ; Height [mm]: 8 ; Weight [g]: 19 ; Regulation type: one-way ; Brzda: Yes ; Sensor input: No ; Programmable: Yes

Technical data:
- Used for: Aeroplane,Helicopter
- Type: AC
- Constant current [A]: 20
- Max. peak current [A]: 25
- NiXX cells: 5 - 9
- LiXX cells: 2 - 3
- BEC voltage [V]: 5
- BEC current [A]: 2
- Length [mm]: 42
- Width [mm]: 25
- Height [mm]: 8
- Weight [g]: 19
- Control: one-way
- Brake: Yes
- Sensor imputs: No
- Programmable: Yes