brushless motor BOOST 10 | KV=1400 / Combo V2 17010

Pichler brushless motor BOOST 10 | KV=1400 / Combo V2

Item number: P-17010
EAN: 4056534063789

High-quality BLDC brushless motor (external rotor) for model aircraft. The BOOST motor series is the result of over 15 years of experience in the field of modern electric drives.

Product features:
- Highest manufacturing quality
- Perfect ventilation due to open housing design
- Use of the best materials
- High-temperature-resistant neodymium magnets
- Extra large quality ball bearings

Range of application - model/flying weight:
- 3D aerobatic models up to approx. 350g
- Aerobatic models up to approx. 400g
- Scale models and trainers up to approx. 500g
- Gliders up to approx. 600g

Scope of delivery:
- BOOST 10 brushless motor
- XQ+ 15A controller
- Aluminium mounting cross
- 1 propeller adapter each for forward and aft bulkhead mounting
- Mounting screws
- Spare motor shaft
- Instructions German/English

Technical data:
- Dimensions Ø = 28mm / L = 25mm
- Weight = 49g
- Shaft diameter = 3.2mm (3.175mm)
- LiPo battery (recommended) = 2 -3 cells
- Idle speed per volt = 1400 rpm (KV)
- Max. Load = 10A (20s)

Propeller (recommended):
- PI-CON 7x5, # C5745 @ 2S LiPo (7.4V)
- PI-CON 6x4, # C5744 @ 3S LiPo (11.1V)

LiPo battery (recommended):
- LEMONRC 1000-7.4,
- RED POWER 1100-11.1V

Special accessories (recommended):
- Programming box, # 15966

An overview of all BOOST brushless motors can be found here:

Note Of course, other propellers (e.g. 3-blade or smaller sizes) than those specified here can also be used.
Batteries with a different, e.g. higher capacity can also be used. Please ensure that the permissible currents (A) are not exceeded.
We recommend our tried and tested POWER WATTS 150, # C7282, for simple current measurement. A device which is always needed and should not be missing in any equipment.


Caution! Not suitable for children under 14 years of age.