Programming board G2 Ray

item number: 800407

Order quantity {quantity} {pc}

Unit price: {PRICE} EUR

Quantity:

Delivery time: z.Zt. nicht lieferbar

incl. 19% VAT.		without tax
EUR 9,50	/	EUR 7,98
plus Shippingcost

Review

Programming card G2 Ray

Item number: 1RC42015
EAN: 8595241387796

The programming card for flight controller RAY G2 is used for easy and fast programming of the controller - at home "on the table", as well as on the airfield. The controller is connected by means of a servo cable, the socket is located on the upper side of the card. The BEC system of the RAY G2 controller provides the power supply to the card. Programming is done with the motor and drive battery connected.

ATTENTION: The LED programming card RAY G2 cannot be used for programming of the first generation RAY controllers and the programming card of the first generation RAY cannot be used for programming of the RAY G2 controllers.

The RAY G2 controllers can be programmed in the model with the propeller mounted - however, for safety reasons we recommend that you remove the propeller during programming to prevent a possible accident in the event of an operating error.

Four buttons on the bottom of the card are used for programming. With their help you select the program functions for setting and you set their value, which is signaled by lighting of the corresponding LED diode. By pressing the "OK" button, you confirm the performed change and save it in the controller. The "Reset" button is used to delete all settings and reset all values to factory settings. The status of communication with the controller is indicated by the "Connecting" LED.

Programming: unplug the servo cable of the controller from the receiver and plug it into the socket in the upper right corner of the board, marked as "BEC". Connect the drive battery to the controller; the LEDs on the card will light up and show you the currently set values of the individual functions - now you can make adjustments!

The list of functions and adjustable values are noted on the plate on the card, the functions are described in detail in the instructions supplied with RAY G2 controllers.

Technical data:
- Power supply [V]: 4.8 - 6
- Length [mm]: 92 ; Width [mm]: 52 ; Height [mm]: 6
- Weight [g]: 26