Programming card KAVAN ESC KAV32.42015

Programming card KAVAN ESC

Item number: KAV32.42015
EAN: 8596450023512

The programming card for flight controllers KAVAN R is used for easy and fast programming of the controllers - at home "on the table", as well as on the airfield. The controller is connected by means of a servo cable, the socket is located on the upper side of the card. The BEC system of the RAY G2 controller provides the power supply to the card. Programming is done with the motor and drive battery connected.

ATTENTION: The LED programming card KAVAN R cannot be used for programming of the first generation RAY controllers and the programming card of the first generation RAY cannot be used for programming of the KAVAN R controllers.

The KAVAN R controllers can be programmed in the model with the propeller mounted - however, for safety reasons we recommend to remove the propeller during programming - this will prevent a possible accident in case of an operating error.

Four buttons on the bottom of the card are used for programming. With their help you select the program functions for setting and you set their value, which is signaled by the lighting of the corresponding LED diode. By pressing the "OK" button, you confirm the performed change and save it in the controller. The "Reset" button is used to delete all settings and reset all values to factory settings. The status of communication with the controller is indicated by the "Connecting" LED.

Programming: unplug the servo cable of the controller from the receiver and plug it into the socket in the upper right corner of the board, marked as "BEC". Connect the drive battery to the controller; the LEDs on the card will light up and show you the currently set values of the individual functions - now you can make adjustments!

The list of functions and adjustable values are noted on the label on the card, the functions are described in detail in the manuals delivered with KAVAN R controllers.

Technical data
- Power supply [V]: 4.8 - 6
- length [mm]: 92
- width [mm]: 52
- Height [mm]: 6
- weight [g]: 26

Scope of delivery:
- 1 Programming card KAVAN ESC