YGE Aureus 185 Brushless ESC 185A with Telemetrie and BEC

YGE Aureus 185 Brushless speed controller 185A with telemetry and BEC

Article number: AUR 185
EAN: 0086544920226

HV (High Voltage) in modelling refers to applications in the high voltage range of usually 12s to 16s LiPo. The YGE HV regulators are characterised by their high performance and small size. Thanks to their compatibility with all common remote control systems and telemetries and the pre-programmed operating modes, they are universal and versatile. All YGE controllers have a 32-bit processor with high computing power.

Technical data:
- 6 - 12S Lipo
- Current 185A, 270A chest
-BEC 5.5V - 12V
- BEC 10A continuous, 25A peak
- "T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
- Updateable (optional USB adapter available)
- completely revised hardware and software (32-bit)
- the PWM frequency is automatically adjusted to the needs of the motor
- The specified current is the maximum continuous full throttle current with good cooling
- Reverse regulation or shutdown in case of undervoltage
- Current limiting
- Undervoltage detection can be switched off
- Speed ​​control (Governor mode)
- Soft start (sine or block commutation)
- Super slow soft start for scale helicopters possible (60sec.)
- Active freewheel, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 levels
- EMK brake adjustable
- F3A / Acro brake (brake force continuously adjustable in flight)
- Min. and max. values ​​are logged and can be displayed after the flight in the optional PC tool (e.g. power)
- Speed ​​limit: 240,000 rpm (2-pole)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
- Weight with cable: 269g
- Dimensions: 96.5 x 47 x 28mm

Scope of delivery:
- YGE Aureus 185
- RC connection cable
- Fan
- Sticker
- Instructions