Futaba Reciever R7003SB 2,4GHz FASSTest

Robbe Futaba F1004 Reciever R7003SB 2,4GHz FASSTest

Compact, lightweight R7003SB 2.4 GHz FASSTest® receiver with integral telemetry transmitter.

-Smaller, only 7g, lighter 3 /18 - channel 2.4GHz FASSTest® S.BUS-Receiver with full range and integrated Telemetry transmitter.
- Ultra-slim for models with narrow fuselages.
-With the S-BUS system for up to 18 channels, making it suitable for all models from mini-helicopters to large-scale aircraft.
-Normal PWM-output
-The 3 PWM-Servo channels outputs are divided in 7 groups of outputs Port 1 and 2, whereby the output allocation may be freely selected.
-S.BUS output Up to 18 of the new, programmable S-BUS servos or peripheral devices such as gyros,
-Flybarless systems or speed controllers can be attached in series directly to this output.
-One feed cable for all channels.
-No cable „spaghetti", and reduced weight.
-All standard servos can be connected to receivers with an S.BUS PWM adapter.
-It does not get any simpler.
-High Response
-Switchable output speed of the control pulse for digital servos, 6.3 ms instead of 16 ms,
-which leads to a still shorter reaction time.
-Aerial Diversity
-The 2 Aerial Diversity system continuously checks the signal level at both aerial inputs and switches over in a split second to the stronger signal with no transition period.

Telemetry

-S.BUS2 devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted.
-The receiver's integral transmitter sends the telemetry data present at the S.BUS2 socket to the FASSTest® transmitter, where the data are displayed on-screen or generated in audible form.
-Alternatively, the data can be transmitted to a separate Telemetry-Box.

-When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

Power

-A further voltage range from 3.7...7.4 V nominal voltage, when using 7.4 LiPo-Batteries for receiver power, all connected servos must possess the appropriate voltage capability.
-The receiver does not feature an internal servo voltage limiter for the high voltage servo voltage.

Recommended accessory:

-F1001100 „Extra Voltage" connecting lead with fuse.

Specification:

-Frequency band 2.4 - 2.4835 GHz
-Spot frequencies 36
-Channel count 18
-Channel spacing 2048 kHz
-Transmission system FASSTest
-Voltage 3.7...7.4 Volt (4 - 5 Nx, 2 LiFe, 1 - 2 LiPo)
-Current 50 mA
-Dimensions 37.4 x 22.5 x 9.3 mm
-Aerial length 14 cm
-Weight approx. 7,2 g

Set contents
Including adapter for the „Extra Voltage" connecting lead at Port 2.