KAVAN R10 Receiver, Stabiliser KAV18.10010S

KAVAN R10 Receiver, Stabiliser KAV18.10010S

Item number: KAV18.10010S
EAN: 8596450100947

The KAVAN R10 10-channel telemetry receiver operates using a Twin 2.4 GHz dual-frequency transmission system. It features 8 high-precision PWM channels and 16- or 24-channel mode via S.BUS. Two detachable antennas with IPEX4 connectors ensure full signal strength over a range of up to ten kilometres. It is particularly suitable for gliders, but can also be used for other models. With redundancy support, it can be connected as the primary receiver via S.BUS. Using the Twin 2.4 GHz protocol in this configuration, both receivers operate simultaneously. Thanks to the F.BUS connection option, you can also connect it quickly and easily to several different telemetry devices, enabling bidirectional data transmission via a single cable.

It features advanced interference suppression for reliable, stable signal transmission across the entire range. The transmission system’s intelligent pairing accelerates the binding process. The black box function stores basic flight data. The receiver’s operating status is indicated by an LED display. Intelligent binding enables wireless firmware updates.

It is also available in an unstabilised version (#KAV18.10010 R10). R10 Stabi offers enhanced ADV stabilisation functions. ADV stabilisation provides an advanced mode with a range of programmable stabilised channels and a wide variety of applications.

The classic stabilisation mode has been expanded to include 5 additional stabilisation channels, which allow pin mapping for each channel in certain flight modes such as stabilisation, Auto-Level (level hold), Hover and Knife-Edge with aircraft models.

The advanced stabilisation functions include high-precision telemetry sensors for monitoring altitude, vertical speed, etc.

In ADV mode, all output pins are configurable for stabilisation and other advanced functions, such as the sharing of Stab files, programmable parameters and developer access, etc.

Technical specifications:

- RF transmission system: Twin 2.4 GHz
- Dimensions: 64×16.6×12.4 mm (L×W×H)
- Weight: 9.4 g
- Operating voltage: 3.5–12 V (recommended battery: 2S LiXX)
- Operating current: ≤120 mA at 5 V
- Vario – vertical speed measurement range: ±10 m/s
- Vario – altimeter range and resolution: -700 m to 10,000 m, 0.1 m
- External voltage measurement range via AIN2: 0–35 V
- Antenna connector: IPEX4
- Compatibility: Twin 2.4 GHz
- Max. radiated power: < 20 dBm
- Operating frequency: 2.400–2.4835 GHz

Features:

- Enhanced protection against RF interference and more stable RF transmission
- Simultaneous 2.4 GHz dual-frequency transmission system with intelligent binding
- Integrated advanced stabilisation functions (R10 Stabi)
- Integrated high-precision telemetry sensor (altitude, vertical speed, etc.)
- Black box function
- Long maximum operating range
- Wireless firmware updates (OTA – Over-the-Air)
- 10 configurable channels
- CH1: PWM / S.BUS OUT / FPort / S.Port / SBUS IN
- CH2–10: PWM / SBUS OUT / FBUS / S.Port
- F.BUS / S.Port
- SBUS OUT port (supports 16/24-channel mode)
- SBUS IN port (supports signal redundancy)