Tray Remote Control Set mc-28 HoTT 16K 33028.77

Graupner 33028 Tray Remote Control Set mc-28 HoTT, DE, 16 Channels & Receiver GR-18

Hand and tray-type transmitters:
The transmitter

The transmitter Graupner mc-28 HoTT is the model for advanced model pilots. The mc-28 adapts itself to almost all models. 16 function controls, 120 internal model memories, integrated telemetry and voice messages so as the fast and reliable bi-directional transmission of the Graupner HoTT 2, 4 GHz technology, it all makes the mc-28 a true allrounder.

The mc-28 transmitter features an internal circular polarized patch antenna with very high range and reliability.
Furthermore the temperature calibrated hall sensors gimbal sticks offer an outstanding durability and reliability.
Two wide, contrastful displays inform you at any time about telemetry data and parameters and they allow a quick and easy programmation.

The switches and buttons of the transmitter can be freely assigned thus making them customizeable. There are also 12 mixers available. 8 switch-phase programs with announce function can be adjusted and named for every model.

Thank to the micro SD card and the micro USB port telemetry data and model memories can be imported and exported. Also firmware updates can so be played without any complication.

The receiver

The receiver Graupner GR-18 is one of the most successful receiver of Graupner range. the small, lightweight, with its only 12 grams, features 9 channels and offers through its two antennas a constant connection (antenna diversity).
Thre GR-18 transfers, without any additional component, voltage and temperature of the receiver so as signal strenght to the radio. The warning thresholds can be easily programmed through the transmitter.
The receiver is featured as standard with the gyrosoftware for airplanes and helicopters models, which are perfect for models of airplanes with gyro function and helicopters with flybarless.
Through update it is possible to upgrade the receiver to a flight controller for racecopters and 3D copters.
The setting is very easy to carry out through the telemetry in the transmitter, thus eliminates any interface for settings as PC, App and so on.

Integrated Bluetooth® v2.1+ EDR module with 115200 Baud for the use of Graupner HoTT Viewer for Android™ (Firmware >=2.2) to display telemetry data and announces on your smartphone.
The language outputs can be output in a timed manner.
The warnings can be defined in the smartphone.
Furthermore, a Bluetooth® v2.1+ EDR headset can be connected directly without a smartphone.

You will find the latest software and firmware in the section "Service / Help" under " Updates".

The Graupner Shop offers you a wide range of accessories and spare parts for your remote control system and your models.

Manufacturer's recommended age: 14 years and over
Features
Microcomputer remote control set implemented with the very latest 2.4 GHz Graupner HoTT technology
Ring limiter and channel sequencer
Bidirectional communication between transmitter and receiver
Wireless T/P function
6 different languages (German, English, French, Italian, Spanish and Dutch) available via software update. For the availability of a given language, go to the Download area.
Storage of telemetry data with date and time
Servo cycle times of 10 ms can be selected for digital servos
Ultra-fast response times through direct and reliable transmission of data from the main processor to the 2.4-GHz transceiver. No additional delays due to detours via a module processor.
Operating and programming are similar to the proven concepts implemented in the mx-24
A high- contrast, blue-illuminated graphic display ensures perfect control of parameter settings such as model type, model memory, timers and operating voltage.
12 control functions
Free assignment of all switches
24 model memories
10 switches/keys , including two long 3-position switches, four 2- position switches, 2 long keys, 2 keys on the rear and 2 slider regulators as well as 2 side rotary controls
Modes 1 to 4 freely selectable
CAP TOUCH operating elements with key lock function to prevent unintentional operation.
Numerous telemetry, programming and evaluation functions are presented directly on the transmitter's screen
Voice output can be called up via freely programmable switches
Extensive programs for fixed-wing and helicopter models
Swashplate limiter
"Monitor" switch to check all switches and control switches
12 freely programmable mixers for wing or helicopter models, each with freely selectable input and output functions, including 4 curve mixers with 5-point curve technology in 1% increments, resulting in curve values that are easy to set and adjust at up to 5 points for throttle, pitch, tail or other non-linear actuations. The processor in the CPU employs an ingenious method of calculating polynomial approximations for truly-rounded, ideal MPC (multi-point curve) mixer curves.
7 flight-phase programs can be individually adapted for each model and given a name. The switchover time is programmable separately.
SUPER SERVO menu with a perfect overview of all servo setting data and simple parameter correction for 4 "levels" (direction of rotation, mid-point setting, separate servo travel on both sides and separate travel limiting on both sides for 12 servos with a total of 72 possible settings)
SUPER-DUAL- RATE, EXPO menu with 36 possible settings for 3 servo functions and 6 flight phases.
Highly practical multi-function menu for fixed-wing and helicopter models. Entry of the number of aileron and flap servos automatically programs all necessary mixer functions in the multi-function "Wing mixers" menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function and other special functions
Helicopter swashplate mixer for 1, 2, 3, or 4-point steering.
Fail-safe for 12 servo functions
Convenient timers menu . Stopwatch system, alarm timer, countdown timer, laps counter, etc. Two timers and one lap counter/timer can be displayed at the same time.
Stopwatch with history : in addition to the lap counter there is a time 1 which captures the ON time and a time 2 which records the ON and OFF times separately.
The transmitter's operating time timer is automatically reset to zero by the battery charging process.
Flight phase switch assignments: now 6 switches , 2 with priority function . Every switch combination can be named freely. This makes the number of flight phases independent of the number of flight phase switches.
Linearising switchplate servos : electronic compensation for non-linear travel of swashplate rotary servos.
Tail type normal, V-tail, Delta/flying-wing and 2 EL Sv 3+8 (which immediately makes 2 coupled elevator servos available without using free mixers or dual mixers)
Flap count up to 4 AIL/4 FL: Full support of 8 wing servos, now even without use of free mixers.
Flight phase switching delay, can be switched off: the delay time can be switched off for individual channels flight phase by flight phase (e.g. for motor off in electric models or to activate/deactivate helicopter head lock).
16 phase names
Fixed-wing mixer: New concept for the multi-flap menu to simplify settings of up to 8 wing servos on a flight-phase-specific basis in a comprehensible manner without requiring the use of free mixers.
Number of flight phases: (fixed-wing: 7, helicopter: 6 + AR)
Phase trim
Switchable Snap-Flap mixer EL => FL with a new offset function for easy course corrections and fast turns
3 ring limiters for Voith-Schneider and similar drives
Channel sequencer for 3 channels for folding motors and landing gear doors
Logical switches
Trim memory
Multi-channel function to expand channels for up to 14 additional channels
Music player and internal speaker for voice output and music
Swapping of servo assignment at receiver output on transmitter side and receiver side
PPM signal adjustable at the data output
Model memories of the mx-20 can also be loaded directly into the mc-20. To do so, simply copy the model memories on the PC to the appropriate directory. Then the switches and controls must be newly assigned because of the different hardware.
The Set contains:
Graupner HoTT mc-28 microcomputer telemetry transmitter with built-in LiPo 6000 mAh transmitter battery
Graupner HoTT GR-18, update cable
µSD card
Aluminium case
Hand rests
Neck strap
Short and long joystick
Transmitter strap (strap: 55% polyester, 45% acrylic, neck pad: 65% polyester, 35% acrylic).
Bluetooth® v2.1+ EDR module
Characteristics:
Linearization of the swash plate servos: Electronic compensation of the non-linear path of swash plates.
Tail configuration type normal, V tail, delta / flying wing, 2 ELE Sv 3 + 8 (two elevator servos interconnected are now available without the use of free mixers / crossmixers)
Flap count up to 4 ALE / 4 FLAP: Full support of 8 wing servos, now also without the use of free mixers.
Switchable flight phase changeover delay: The deceleration time can be switched off for individual channels in the flight phase mode (eg for motor-off in case of electric models or head-lock enable / disable heli).
16 Phase names
Wing mixer: Newly designed multi-flap menu for simplest settings of up to 8 wing servos in a flight-specific and clear manner even without the use of free mixers.
Number of flight phases: (airplane: 8, Heli: 7 + AR)
Phase trim
Switchable snap-flap mixer ELE-> FLAP with new offset function for easy course corrections and fast turning
3 Ring limiters for Voith-Schneider drives and similar
Channel sequencer for 3 channels for folding propulsion and landing gear flaps
Logic switches
Trim memory
Multi-channel function for channel expansion for up to 14 additional channels
Music player and internal speakers for voice and music
Interchange of the servo assignation at the receiver output both on transmitter and receiver
PPM signal can be set at the data output
General HoTT features:
Simple and extremely fast binding
Range test and warning function
Undervoltage warning
Extremely wide receiver operating range from 3.6 V to 8.4 V (functional up to 2.5 V)
Failsafe, channel mapping, mixing functions and all servo settings are easily programmable with internal telemetry
Binding of any number of receivers for channel expansion (32 channels maximum)
Up to 4 servos can be controlled in block with a servo cycle time of 10 ms simultaneously (only digital servos!)
Maximum interference immunity through optimized frequency hopping and wide channel spreading
Intelligent data transmission with correction function
Extremely fast rebinding even at maximum distance
Real time telemetry evaluation
More than 200 systems can be used at the same time
Future- proof by updating via USB interface or microSD card