33110 MX-10 Computersystem Hott

MX-10 Computersystem Hott Graupner 33110

Description
The mx-10 HoTT with its 5 control functions can give experienced RC model builders control over virtually any model. The use of Graupner HoTT 2.4 GHz transmission technology safeguards high functional reliability through bidirectional communication between transmitter and receiver with telemetry display via the optional Smart Box and ultra-fast response times.

Age recommended by manufacturer: 14 years and up
Programming with switches
Dual rate switch 70 % / 100 %
Wireless teacher/pupil mode
Wireless simulator operation via the SUM signal of the receiver
Mixer for rudder or delta- wing or V-tailplane in the transmitter
Additional mixers possible via the receiver
Servo reverse function
Mode 1-4 programmable
3-pole serial connection for USB adapter #7168.6 for firmware upgrades and for display of telemetry data with the Smart-Box #33700
Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
Bidirectional communication between transmitter and receiver
Wireless L/S function
Servo cycle times of 10ms can be selected for digital servos (with Smart-Box)
Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor
Short aerial, foldable
5 control functions
Modes 1 to 4 are freely selectable
Programmable failsafe function »Stop« or »Advance to preset positions«
Charger socket for chargeable transmitter battery
Integrated V-mixer, delta-mixer, or rudder mixer selectable, makes it possible, for example through skilful combination of control functions to accomplish finely dosed and realistic turning manoeuvres, such as for track vehicles, duo-boat drives, and V-tailplanes on aircraft models
Servo- reverse switch for simple adaptation of turning direction for all control channels

The Set contains:
Microcomputer telemetry transmitter Graupner HoTT mx-10 with built-in rechargeable 1500 mAh NiMH transmitter battery, Graupner HoTT GR-12 receiver, 200 mA transmitter charger

General HoTT characteristics:
Simple and extremely fast binding
Range test and warning function
Undervoltage warning
Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)
Fail-safe, free channel assignment (channel mapping), mixer functions and all servo settings are easy to program with the HoTT Smart Box
Up to 4 servos can be controlled simultaneously as a block in a servo cycle time of 10 ms (digital servos only)
Maximum noise immunity due to optimised frequency hopping and wider channel spread
Intelligent data transfer including error correction
Extremely fast rebinding, even at maximum distance
Real- time telemetry evaluation
More than 200 systems can be used simultaneously
Update capability via USB interface guarantees future viability
Info
Safety:

FHSS, frequency hopping over up to 75 channels

Maximum interference immunity through optimised frequency hopping, wider channel spread and antenna diversification

Intelligent data transfer including error correction

Extremely wide range

Range test and warning function

Undervoltage warning

Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)

Numerous fail-safe functions

Precision:

Shorter response times can be set (10 ms period time)

No additional delays due to module processors All hopping management is handled directly by the 32 bit main processor.

Synchronous servo operation made possible by simultaneous control of servo outputs in blocks of 4

Pilot feeling:

Essentially delay-free control responses due to direct processing

Real-time telemetry evaluation

PC software for analysis or display of downloaded telemetry data

Buzzer signal programmable for peak T/P function receiver output, satellite receiver, simulators, flybarless stabilization systems, etc.

Model-memory-dependent binding, except for copied model memories

Wireless teacher/pupil function

3 flight phases programmable

Swashplate limiter

Motor off function

Numerous fixed-wing and helicopter mixers

Other features:

Simple and extremely fast binding

Free channel assignment (channel mapping), transmitter and receiver mixer functions and all servo settings are simple to program

Binding of any number of receivers for channel expansion (16 channels maximum) The last receiver bound sends the telemetry data.

Update capability via PC interface guarantees future viability
NEW:
Extremely wide range
SUM signal programmable at the output of the highest channel for T/P, simulators, V-stabilisers, etc.
Servo outputs can be controlled simultaneously in blocks of 4
Sensitivity and speed of the vario sensors can be adjusted
Faster response times (10 ms period time, adjustable)
No additional delays due to module processors All hopping management is handled directly by the main processor.
option
Wireless teacher/pupil function
Specification
Width [mm]: 175 mm
Height [mm]: 115 mm
Temperature range [°C] : -15 ... 55 °C
Aerial length [mm]: 120 mm
All-up weight [g]: 630 g
Frequency : 2400 ... 2484,5 MHz
Range approx. [m] : 4000 m
Overall length [mm]: 190 mm
Dimensions [LxWxH in mm]: 190 x 175 x 115 mm
Current consumption [mA]: 125 mA
Operating voltage neutral [V] : 3,4 ... 4.8 V
Touch Display: No
Teacher- / student-system: Yes
Voice output: No
Channels: 5
Telemetry capable: Yes
Mixer: Yes
Display?: No
HoTT - Technology: Yes
Language variant: DE/GB
Transmitter series: mx