HelloRadio V14 MAX R9 OLED 2,4GHz ELRS LBT M2 remote control pink purple HR1044

HelloRadio V14 MAX R9 OLED 2.4GHz ELRS LBT M2 Remote Control Pink, Purple HR1044

Item number: HR1044
EAN: 6978279202934

The HelloRadio V14 MAX R9 remote control combines cutting-edge technology with sophisticated design, giving you complete control. Equipped with the open-source EdgeTX system, an OLED display, and an innovative AI voice assistant, it opens up entirely new possibilities. Intelligent safety features, flexible module compatibility, and precise motion control ensure you maintain complete control at all times. Another highlight is that the LEDs around the gimbals can be programmed in a variety of colors.

Open-source EdgeTX system
The V14 MAX R9 comes pre-installed with the EdgeTX open-source firmware. EdgeTX is an open-source firmware for remote control transmitters used in RC applications such as model airplanes, drones, model ships, and model vehicles. It is highly customizable, allowing users to configure their transmitters and adjust the settings to their individual preferences and specific needs.
EdgeTX supports a wide variety of RC protocols, making it a popular choice in the RC community. Its flexible and powerful features make it a versatile tool for advanced users looking to take their RC activities to the next level.

ELRS Radio System
The V14 MAX R9 is offered with an internal ELRS RF module. ExpressLRS (ELRS) is an open-source radio system that offers a high update rate and low latency. It is ideal for all RC applications where fast response times are critical.

T-Antenna
The newly developed and patented T-antenna ensures excellent signal quality and increased range. The foldable T-antenna also serves as a carrying handle.

AI Voice Assistants
The V14 MAX R9 is equipped with AI voice recognition, which offers a unique interaction experience with the transmitter through personalized voice inputs, supported by the EdgeTX software.

Intelligent Safety Features
The V14 MAX R9 is equipped with three high-precision voltage and current sensor measurement units with a measurement accuracy of 0.2%. This allows the system's operating status to be monitored in real time, as well as the working status of the transmitter battery, the main control system, the built-in radio frequency module, and the external radio frequency module. If the system detects abnormal current and voltage signals, it automatically protects the system and the radio frequency modules and issues warnings. It prevents damage caused by moisture, short circuits, overvoltage, and overcurrent, and prevents flight accidents in advance.

Motion Control
The V14 MAX R9 is equipped with 3-axis acceleration and 3-axis gyroscope sensors. This allows control functions to be controlled by moving the transmitter—i.e., changing its position. The motion control function is activated via the AI ​​voice assistant and deactivated again by moving the gimbal.

Programmable Gimbal LED
The two LED rings consist of 16 colored LEDs. The flashing mode and colors of the gimbal LEDs can be customized using a simple selection program. Switches can then be used to switch between different modes.

HG01 CNC Gimbal RDC90
The HG01 control stick units are fully CNC-machined and mounted on four ball bearings for maximum precision. The preload and travel are accessible from the front, allowing for easy fine-tuning. The HG01 control stick units are equipped with a highly precise and durable RDC90 sensor.

Features:
- Open-source EdgeTX system
- AI voice assistant and voice control (say "Hello Radio" to activate the voice assistant)
- Equipped with three voltage and current measuring units with an accuracy of +/-0.2%, which can independently measure the voltage of a single battery cell of the transmitter and monitor the charging voltage and current in real time.
- Motion control for controlling functions by moving the transmitter
- Programmable gimbal LED consisting of 16 colored LEDs
- CNC-machined and quadruple ball-bearing control units for maximum precision
- 2.4-inch OLED touch display
- Foldable T-antenna for excellent signal quality and increased range.
- Precision CNC-machined metal gimbal with four ball bearings
- Multimode control arrangement – ​​select between Mode 1, 2, 3, or 4
- Mode switches 1 to 6 can be configured as desired
- Internal ELRS RF module
- Compatible with external modules with a Micro-JR slot
- Dual serial hardware port for communication with the external RF module
- Reverse control circuitry to support multiple types of external RF modules
- Charging circuitry automatically stops charging if an overvoltage is detected in the battery cells
- Protection circuitry to prevent damage from reversed power supply connection
- USB-C port for connecting to the PC
- 3.5mm jack for connecting a teacher/student cable
- 3.5mm jack for connecting headphones
- USB-C port for connecting a charging cable
- SD card slot with a 512MB Micro SD card

Technical specifications:
- Dimensions: 182*132*54 mm
- Weight: 540g (without battery)
- Transmission frequency: 2.400 GHz–2.480 GHz
- Internal RF options: ExpressLRS
- Transmitting power: LBT max. 100 mW
- Supported protocols: Module dependent
- Working current: 260mA
- Operating voltage: 6.6–8.4 V DC
- Radio firmware: EdgeTX
- Channels: 14 channels
- Display: OLED
- Sensors: RDC90
- Module bay: Compatible with the following micro JR modules: Multi-protocol modules, Ex-pressLRS, Ghost, TBS Crossfire, TBS Tracer, etc.
- Update method: Supports USB-C for online updates / SD card for offline updates
- Battery bay: Standard 18650 batteries (2 pcs) or HelloRadio TX battery pack

Included in delivery:
1x V14 MAX R9
1x Carrying Case
1x Gimble Protector
1x Hand Grip
1x Transmitter Strap
1x USB-C Cable
1x 1.5 mm Allen Wrench
1x 18650 Battery Case
1x Screen Protector
4x Reduced Tension Springs
1x Quick Start Guide
1x Sticker