SERAFIN-CFE-85% ARF 2000mm Blejzyk

SERAFIN-CFE 85% ARF 2000 mm Blejzyk

item number: 133594
EAN: 0086544912795

Description

High performance slope and thermal flying model with a wide speed range. The 2-piece wing with simple V-shape is easy to transport, the modern wing geometry gives the SERAFIN a unique silhouette.
With tailplane (C), flaps (F) or flaps and electric fuselage (E)!

New, now also with its own electric fuselage!
The motor bulkhead is already glued in place, battery and electronics are easily accessible through the canopy, see pictures of fuselage type 2!
Max. Motor Ø 28 mm, prepared for spinner Ø 30 mm.

Artur Blejzyk is a professional Polish manufacturer with many years of experience in the design and manufacture of high performance glider and electric model aircraft. The GRP fuselages are of very good quality, the wings are uniquely executed or processed. To put it simply, they are true works of art!
The result is fantastic model aircraft that fly as well as they look.
The product range covers all areas, from models for beginners to experienced modellers and competition pilots.
The passion for model flying and high-quality products with perfect flight characteristics are the best guarantee for exceptional flight models.

Reasons why you should buy these models:
- Exceptional and modern construction
- Excellent flight characteristics and outstanding performance
- Intelligent use of contemporary materials makes the models light, robust and easy to finish
- High-quality and precision-manufactured components that fit together perfectly
- High degree of prefabrication reduces construction time to just a few hours

Construction / Contents:
- Precisely manufactured veneer-covered styrofoam surfaces bonded with aerospace resin. Pressing under high pressure guarantees 100 % profile accuracy. The veneer used is Polish black poplar. The special feature is the fine-fibred structure, which guarantees very high strength in addition to the low weight. The veneer is always mirrored on the surfaces = the left and right surfaces have the same course. This gives each model a unique symmetrical look.
- Necessary reinforcements such as glass and/or cabbage cloth inlays or spars are already installed, nose strips and edge bows made of hardwood are ready sanded. The installation of the spars made of carbon rods or flat steel is prepared, the holes or slots are installed in the surfaces with corresponding reinforcements.
- All rudders in the wings are of unique construction with elastic flaps, cut out and sanded.
- The cable duct is cut out and the recesses for the servos (on all models with a wingspan of more than 1700 mm) are circularly milled with a diameter of 50 mm.
- Light white coloured GRP fuselage with several layers of glass fabric and reinforced with carbon fibre if necessary.
- Tails are designed to be removable
- Tails made of hand-sorted light balsa and reinforced with GRP if necessary. The leading edge and the rim bow are sanded, the rudders are cut out and fitted with invisible hinges.
- Accessories with necessary linkages such as Bowden cables, push rods, rudder horns etc., glass fabric tapes, plug-in tubes (if necessary), fixing screws, glue-in nuts and GRP servo covers.
- Detailed building instructions with all necessary details

Finishing tips

For this type of model, transparent varnishes are an excellent surface protection. In addition to the visual effect - the veneer gradient unique to each model with its different light and darker shades - this surface treatment significantly improves the flight characteristics and performance.

Despite the surface treatment with sandpaper up to grit size 400, there remains a residual roughness that is no longer noticeable, which has a positive effect on performance and tear-off behaviour.

Varnishes are often used for wood floor coating (high surface hardness, can still be sanded easily). Make sure that these lacquers, which usually contain solvents, do not come into direct contact with polystyrene, as this will be dissolved.

Technical data:
- Span (mm) 2000
- Length (mm) 937
- Flight weight (g) 770+
- Profile S6063 mod.
- Functions: H, S, Q, Wkl, M
- Necessary number of channels: 6+
- Fuselage: GFK white
- Surface: Styro surfaces veneered
- 2 x DS113MG or X08 (height + side)
- 4 x DS113MG or X08H (cross + camber)
- Battery recommendation: 11,1V/650mAh 25C+
- ESC recommendation: 30A+
- Motor recommendation: AXI 2212/20 Gold Line V2 Long KV1150 (see accessories)
- Propeller recommendation: 9 x 5

Scope of delivery:
- GRP fuselage with glued-in motor bulkhead.
- High-strength veneer-covered styrofoam surfaces in lightweight construction, leading edge strip and edge bows made of hardwood ready sanded, ailerons and flaps with elastic flaps ready cut out
- Cross tail unit in balsa lightweight construction, sanded and finished, rudder hinged and sanded
- Accessories such as connectors, linkages, rudder horns, fibreglass tape, screws, launch hooks, servo covers made of GRP, etc.