Delta 24 TRIGON 131700

Aeronaut Delta 24 TRIGON 131700

Item no.: A131700
EAN: 4012230092621

Delta 24 Trigon is a sleek and compact impeller model in conventional wooden construction. The model is designed for the Mini-Fan evo from WeMoTec, an impeller with a diameter of 69 mm. A thrust/weight ratio of approximately 1:1 is possible with a suitable choice of drive.

An ideal propulsion system for the Delta 24 Trigon is the Mini-Fan evo / HET 2W22 impeller set in conjunction with the MF D8 nozzle, which is matched to the propulsion system. The drive delivers 11.8 N thrust from a 4S LiPo, while the current remains below 50 A.
Batteries with a capacity of 3,000 mAh promise a good combination of low take-off weight and long flight time. The addition of ballast to adjust the centre of gravity is not necessary with this design.

The model is assembled on the slipway typical of aero-naut models and is quick and easy to build. The detailed assembly instructions show and describe the individual construction steps and leave no question unanswered. Nevertheless, experience with fast RC models is required to build and, above all, fly the model.

- Flying requirements: Expert
- Model construction: Wooden kit
- Difficulty level building: 4 / 5 (professional)

Technical data:
- Wingspan: approx. 930 mm
- Fuselage length: approx. 810 mm
- Flying weight: from approx. 1,400 g
- Wing area: approx. 29 dm²
- Wing loading: from approx. 48 g/dm²
- RC functions: Altitude/tail (mixed), motor