Klemm L25d E Lasercut Baukasten

Klemm L 25d E Lasercut construction kit Krick 10280

Article-No.: 10280
EAN: 4025792143915

In the years around 1935, the Klemm 25 was certainly the most popular sports aircraft in Germany. This was particularly evident in 1935, when no less than 111 Klemm 25s of the d and e series were at the start of the Deutschlandflug out of 161 registered aircraft. The Klemm 25 has been one of the most popular kit models in the Krick range for many years.

Therefore, it was time to properly adapt this design to the latest production and construction methods. Thanks to the targeted use of laser technology, all the plywood and balsa parts have been constructed in such a way that a plug-in construction has been created which is simple and self-explanatory to build, is a lot of fun to build and very quickly produces a beautiful warp-free shell without any special aids. Nevertheless, emphasis was still placed on scale fidelity and achieving the prototypical flight characteristics of this classic.

Compared to the previous design, many model pilots' wishes for modern construction have been introduced. For example, the wing centre section with landing gear is now firmly connected to the fuselage and both wing halves are attached. The aileron servos are housed in the wing. Furthermore, the entire cockpit area from the engine cowling onwards has been made removable with magnetic holders to allow optimum and convenient access to the RC area. With all these improvements, the model is still just as light as its predecessor and has the same impressive flight characteristics as its original.

The kit contains all wooden parts cut out in finest laser quality, all linkage parts, cockpit windows, landing gear parts and wheels, the deep-drawn engine cowling as well as the decal sheet with the lettering. A detailed illustrated building instruction makes the construction very easy. Due to the prefabrication of the new kit, a building plan is no longer needed. The building instructions explain the construction step by step for the not so experienced model builder.

Not included are covering material, adhesives and paints.

Technical data:
- Scale 1:7
- span 1859 mm
- Length 1071 mm
- Wing area 40,80 dm²
- Elevator area 6,50 dm²
- Flight weight approx. 2000 g
- Wing loading approx. 43 g/dm²

Required accessories e.g.:
- Item No. 42304 Brushless drive set with motor, propeller and speed controller.
- LiPo battery 11.1V approx. 3000 mAh
- 79053 2x Mini Servo 940D with metal gearbox (aileron)
- 79053 2x Mini Servo 940D with metal gear or similar size (rudder and elevator)
- 44030 or 44031 Speedbond glue white 112 g or 500 g
- 45670 UHU Endfest 300 33g
- Covering film Oracover light antique yellow

Adjustment data:
- Elevator:up 9 mmdown 9 mm
- Aileron:up 12 mmdown 6 mm
- Rudder:maximum both sides
- EWD:3,5°