Liliental 40 RC Segler 108400

Liliental 40 RC glider

Item number: 108400
EAN: 4012230113074

This beautifully designed model is a further development of the popular free flight model Lilienthal 32, which has always been able to achieve very good placements in youth competitions. With the Lilienthal 40 RC, upgrading with remote control is no longer a problem. The fuselage offers enough space for 2 micro servos, receiver and battery. A suitable servo board, linkages and Bowden tubes are already included in the kit. However, the model can also be built as a pure free flight model and the RC components retrofitted at a later date. A high launch hook is also included in the kit. As usual from aero-naut, all parts are accurately laser cut. The model's leading edge is already milled to shape - no sanding is required here. The wing is glued together with pre-formed balsa parts using support ribs. The ears of the wings are already made with the appropriate dihedral, which then does not require extensive sanding. With a wingspan of 1,190mm, a takeoff weight of 190-220g is achieved, depending on the configuration with or without RC components. The construction of the model is accompanied by the unique and youth-friendly 3D-style building instructions known from aero-naut models, through which a quick building success is guaranteed. The model is approved and ideally suited for youth competitions in model flying associations.

Technical data:
- Wingspan: approx. 1,190 mm
- Length: approx. 830 mm
- Weight: from approx. 190-220 g
- Wing area: approx. 19.6 dm²
- Wing loading [g/dm²]: 9.7
- RC functions elevator, rudder

To equip as a remote controlled model you need two servos AN-8-HBA (order no. 7003/70) and optionally the drive set order no. 7126/01.

Scope of delivery:
- 1 Liliental 40 RC glider