Picachu Electro/HLG

Picachu Electric / HLG 122cm

The multi-talent to build as a glider or electric glider with V-tail or with tailplane!

The Picachu is a small, unproblematic 2-axle HLG. You can build it either as a classic HLG with throw hole, or as a small electric power HLG. Also you can choose between cross or V-tail. As HLG you can explore the smallest slopes safely, with electric drive you are also without slope and strong limb very long on the way. Flight times from 30 minutes are not rocket science. With the specified drive, climbing capacities of up to 6m / s are possible. A real power HLG!

With a 2S / 850 Lipo you have a running time of about 5.5 minutes.

Technical specifications:

- Span: 122cm
- Body weight: approx. 110g
- Take off weight: Electric from 260g.
- CNC machined kit
- Optionally with electric or HLG hull. Parts for both versions are included in the kit.
- Optionally with cross or V-tail to build. Parts for both tail versions are included in the kit.

Recommended RC equipment:

- 2x Micro Servos 5-9 grams
- Small 4-channel receiver with full range
- Motor Hacker A10-9L for 2S or A10-13L for 3S
- Regulator eg Hacker X-7 Pro, Jeti 8, YGE 12 or similar.
- Battery 2S / 500-850, 3S / 500
- LS 8x4 with matching middle piece and spinner

Kit contents:

Fuselage side walls, frames for HLG and electric, ribs, edge bows CNC milled; Milled surface webs (the ribs are simply plugged in); Jaw and balsa poles, V-connectors for surface and V-tail, milled parts for HLG nasal block; Sufficient material for planking, hull bottom and lid

All small and articulated parts such as rudder horns, pulls, surface screw and drive nut, linkage connections and hinges!

Lettering for HLG and electric version, area plan for both halves of the area.