Wingo 2 Kit Bausatz 'You can fly' Set incl. BL-Motor + ESC + Servos 2656

Wingo 2 kit "You can fly" SET incl. BL motor + ESC + servos 2656

Item number: 2656
EAN: 9010189179719

Wingo 2 for the joy of model flying

Wingo is one of the best entry-level model aircraft, which was launched in 1998 and has been sold successfully worldwide for many years.
The model is now technically modified again available as a kit and largely prefabricated and assembled as a PNP version.

The Wingo 2 is made of lightweight EPO foam, making it even more stable and durable. All previous wooden parts have been replaced with plastic injection molded parts, simplifying and reducing assembly to a few hours. The wing is screwed to the fuselage dome with a 5 mm plastic screw. The wing struts can be hooked in without tools and give the Wingo 2 additional stability.

The included brushless motor is specially tuned for the Wingo 2 and gives the model good control following even at low airspeed thanks to the push drive.

Both the motor and the speed controller are already wired and connected with polarity-safe
soldered ready for installation.
Motor and speed controller have power reserves in order to be able to use the Wingo 2 optionally also for the water start with float.
Therefore, 2 different sized propellers are already included with the model.

The small 5 x 4" propeller is ideal for beginners as the Wingo 2 climbs away flat and does not have a large load change from idle to full throttle. This makes model flying easy to learn.

Once you have practice and enough flying experience, you can install the included larger 6.7 x 3.5" propeller. This propeller increases the power by about 15%. The climb performance will be greater and the propulsion power is strong enough to launch the Wingo 2 with float (optional available) on the water.

A 3s 1100 mAh Lipo battery is used as power supply, which is also equipped with reverse polarity protected plug connection and is available separately.

The new self-adhesive decal has been designed so that the top and bottom surfaces are very different. This makes it easy for the pilot to see the model's flight attitude.
The detailed, illustrated instructions guarantee easy and safe final assembly.
final assembly.

The Wingo 2 is therefore the ideal beginner's model aircraft with good-natured flight characteristics and is also ideally suited for beginner flight training in model flying clubs.

Developed and produced in Germany. A real "Made in Germany" product from Robbe Modellsport!

Technical data:
- wingspan (mm): 1100
- Flight weight approx. (g): 650
- Controls: H,S,M
- Manufacturer: Robbe
- Fuselage: EPO
- Wings: EPO
- Version: KIT - CONSTRUCTION KIT
- recommended battery: 3S/1100mAh LiXX
- length (mm): 900
- recomm. motor: RO-POWER 2822-23
- Profile: NACA 4408 mod.
- flying experience: beginner
- building experience: beginner
- drive type: electric

Scope of delivery:
- Foam parts made of high quality EPO molded foam
- Aluminum tail boom
- high quality decal sheet
- Plastic parts kit for quick assembly
- Brushless speed controller Ro-Control 25A BEC ready wired
- Brushless motor Ro-Power 2822-23 ready wired
- propeller 5x4"
- Propeller 6,5x3,5"
- 2pcs S0009 Rovor servos
- Seat shell
- EPS transport device
- small parts
- comprehensive, illustrated assembly instructions in German/English/French