Prelude-E ARF gliders TP 02089

Prelude-E ARF gliders TP 02089

An easy-to-electric model flying with ailerons, flaps and V-tail. The spacious fiberglass hull offers plenty of room for motors up to 38mm outside diameter and LiPo packs up to 40x40 mm.

The 2-piece surfaces are constructed in balsa rib construction method. As the wing spar is a 12 mm carbon tube and a 3mm carbon rod forms the leading edge. The main use for the weight-optimized model, the thermal flight. Aerobatics is possible because the surfaces are remarkably stiff.

The tailplane is also produced in a conventional manner balsa rib construction and removable for easier transport. Tragflälchen and V-tail are covered with Oracover. The hull has a large support for the tail, allowing easy Postitionieren and align the V-tail without EWD-scale possible.

We recommend the use of 12mm rudder servos for everything. It is possible to steer the V-tail as a rudder. The spinner diameter is 40mm.

Technical data:
- Wingspan: 2500mm
- Length: 1310mm
- Flying weight: 1000-1300g
- Curb weight: 600g