Robbe Modellsport EVOA 3.0 PNP VOLL-GFK 'Elektro' 4-CLIP WING Tensioner 300cm

Robbe Modellsport EVOA 3.0 PNP VOLL-GFK “ELEKTRO”

Item number: R-2691
EAN: 10189166849

It has a very compact and transport-friendly size with its 3.0 m wingspan and the two-part wing, which is attached to the side of the fuselage. Power is transmitted via a large CfK spar connector. The EVOA is manufactured using the latest full GRP sandwich construction and has many carbon fiber reinforcements in the critical areas.
The wing is designed as a typical 4-flap wing with ailerons and flaps, which are classically cross-hinged. The lateral axis is stabilized and controlled via a laterally pluggable pendulum elevator using a bellcrank. The flight characteristics can be described as more than just good-natured, especially due to its low weight.
It can be circled slowly and comfortably in thermals, but can also be used for more sporty dynamic aerobatics.

TECHNICAL DATA:
- Wingspan (mm): 3000
- Approx. flying weight (g): 3200
- Manufacturer: Robbe Modellsport
- Fuselage: GFK/CFK
- recommended motor: BL Outrunner
- Wings: GFK/CFK
- recommended battery: 4S/3200-4000mAh LiXX
- Version: PNP - PLUG N PLAY
- Length (mm): 1500
- Drive type: Electric
- Profile: HQ/W2,5-9
- Flying experience: Professional
- Building experience: Beginner
- Controls: Elevator, motor control, aileron, rudder, flaps

SCOPE OF DELIVERY:
- Model EVOA 3.0 in full GRP/CFRP construction, in mold multi-colored lacquered
- CFK polygonal mating
- Ro-Power Torque X-36 brushless, with 800KV motor installed
- Z-spinner 38mm installed
- 12x8 Aeronaut CAM Carbon propeller fitted
- 2x FS-288 HV servos installed
- 4x FS-128 HV servos installed
- small material
- Assembly instructions in German/English/French


Manufacturer and responsible person:
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
AUSTRIA
Phone: +43/7582/81313-0
office@lindinger.at

Warning!
CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults.