Finesse Max CFK white-carbon LDS-KST-ALU Alpin Version

FINESSE Max 4.01m CARBON

IDS for KST (Alu)

Clour neon-green not neon-red

The Finesse Max was developed for gliding competitions (depart towed by a plane) (F3Q).
To do this, the model must be good in thermals enough to hold the air for 8 minutes dropped from 200m height. But it must also accelerate enough to cover a distance of 1000m (4 bases of 250m and 3 turns) as fast as possible, always from a height of 200m.

Easy to operate and very elegant, the Finesse Max is of course a all-composite glider (glass, carbon and kevlar), equipped with camber flaps and manufactured according to the latest technologies with the greatest care.

For leisure purpose, it is also possible to power her with an electric motor for modelers who are looking for a very powerful and versatile glider and which "works hard" everywhere, on the flat as at the slope.

What you get:
- Fuselage molded in fiberglass-aramid-carbon, painted into the mold. CNC cut RC tray in plywood. Carbon wing pocket in place, glued. Geometry of wings with fuse made for you at the factory. Close stripe and spar of vertical empennage in carbon. Tiger nuts glued at the top of the fin for attachment of the stab. Rudder flex linkage in place inside the fuse. Fiberglass molded, painted elevator servo cover.
- Clear plastic canopy mounted on its molded fiberglass frame. Closing system in place, finished.
- Molded ABS cockpit with integrated pilot to cut and paint
- Carbon molded wings - Herex® sandwich, painted in the mold. Color scheme ready. Ailerons and flaps finished, articulated. Servos covers molded in fiberglass and painted.
- Integral sturdy carbon wing joiner, molded, with 2 internal partitions (possibility to put ballasts inside).
- Carbon molded horizontal tail - Herex® sandwich, painted into the mold. Color scheme ready. Elevator finished, articulated with ball control horn in place. Triangulation of the stab with the fuse made for you at the factory
- Carbon molded rudder - Herex® sandwich, painted into the mold. Color scheme ready.
- Accessories: carbon elevator linkage with threaded couplers and ball clevis, ball rudder horn, MPX sockets for wing servos connection, CNC cut plywood IDS servo frames for aileron and flap servos, all IDS wing controls (hardened steel axles, bearings, epoxy bearings, special epoxy linkages, special IDS arms for KST Servos), ply tray set, screws, etc.

Technische Data:
- Wingspan: 4010mm
- Lenght: 1865mm
- Aerofoil: Special 1/9>1/8
- Wing area: 86,2DCM
- Flying weight electric: 4690-5140g.
- Flying weight glider: 3900-5000g.
- Control Functions: 5
- Center of gravity: 110mm