Swift 2.5 CFK Fast Slope extra Light green Glider-IT

Swift 2.5 Fast Slope XTRALIGHT green

Manufacturer: Glider-IT

Description:
The Swift with its 2.5m wingspan is an absolute aerobatic machine.
Very stable, with a take off weight far below 5 kg it is ideal for slope flying.
But it also cuts a fine figure on the flat. Can be equipped as a pure glider, with electric drive and also with impeller.
Manufacturer Information:

Our Swift 2.5 is a semi-scale version with 2,500 mm wingspan of the famous aerobatic glider Swift S-1, which was developed from the Polish SZD-21 Kobutz in the early 1990s. Since the beginning of the 1990s, many RC glider manufacturers have been presenting their own version of this above-average glider. Glider_it has also interpreted this project, creating a glider that will satisfy pilots looking for performance and fun flying. The Glider_it Swift is a precise all-around glider. The compact size gives the model exceptionally good handling on the ground, yet it is large enough to be highly visible in the air. The 4 flap wing makes the model an all-rounder with good weight and yet very high robustness.

Design:
Fast Slope XTRALIGHT Layout (FS xtr):
Fuselage in GRP + double GRP or Kevlar layer incl. CFRP reinforcement.
Wings: GRP with CFRP spar and single CFRP ply.

Technical data of the model:
- Wingspan: 2,540mm
- Wing area: 44dm2
- Fuselage length: 1.380mm
- Weight (OD, glider): 3,1 kg
- Weight (OD, glider, extralight version): 2,8 kg
- Wing loading (OD glider, extralight version) 63 g/dm2
- Airfoil: XSB (9%)

Info:
- Carbon wing connectors available as an option, weight saving approx. 130 g.

Recommended servos for your Vettore:
- Elevator: KST-CM653
- Rudder: KST-CM653
- Aileron: KST-X10HV
- Flaps: KST-X10HV
- Matching servo frames KST-X10HV Article 800173 (with counter bearing)

Accessory set: rudder horns, wooden clamps and servo mounts. Surcharge €59,95.

For information color design:
The color choice to your model is possible in one color or two colors in the following standard colors ( yellow, black, blue, red, green, white, orange ).
Please indicate the desired color or color combination after ordering, if possible with a sketch.
Special designs and additional (also more complex) foil designs or lacquering can be realized in our company for an additional charge with prior consultation. Please select (single color) at the time of purchase. The additional price for special varnishing/colors is calculated on the basis of a template/view sketch. You can also find ready-made designs or suggestions here in the store under Decors.
Optional: In addition, you can upgrade your model with two visible carbon strips on the underside of each wing at an additional cost of 150 euros.

Scope of delivery:
- Model Swift 2.5 Fast Slope XTRALIGHT green