Swift S-1 GFK/CFK 3,33m MG-DESIGN with 90er Impeller build-inn

Swift S-1 GFK / CFK 3,33m MG-DESIGN with 90er impeller

The Swift comes from Tomahawk Aviation and the impeller, as well as the associated installation, from CNC air sports technology. The film design comes exclusively from MG Modellbau and is already assembled.

Due to the built-in impeller unit, the structure of the model is only limited to the assembly of the servos, controller, receiver and power supply.

The drive is intended for 6S 5000mAh and the motor running time is approx. 2min 50sec or 1200 vertical meters.

The Swift S-1 has a scale of 1: 3.8 and is designed for uncompromising glider aerobatics. The high strength of the model allows all imaginable flight maneuvers.

All oars are fully attached, the control horns are already glued in place. The wing connection with locking is already installed ready for use

The wing of the Swift S-1 was built entirely from CFRP, the fuselage and tail unit from GFK.

Technical specifications:
- Scale: 1: 3.8
- Wingspan: 3.33 m
- Hull length: 1.80 m
- Weight (empty) approx .: 3.9 kg
- Wing profile: NACA mod.

Features:
- Scale replica of the SWIFT S-1
- Fully CFRP wings with elastic flaps, high-gloss painted in the shape
- High-gloss lacquered GRP / CFRP fuselage with finished elevator screw connection and assembled rudder
- Control horns glued in
- fully hinged oars
- Torsion pins glued in and surface lock
- Surface of the servo frame resin-coated
- Elevator and rudder in full GFRP shell construction, CFRP reinforced
- Strongal aluminum panel with carbon fiber filling
- Designed for the fast glider aerobatics
- Small parts included
- Built-in + Jet90-6S 3.3kg engine with Ready to go folding mechanism V2 incl. 90 impeller

Is still needed:
- 6 x servo (standard size) e.g. HR: 1x Savöx 1256 or Hitec HS-645MG SR: 1x Savöx 1256 or Hitec HS-645MG QR: 2x Savöx 1250 or Savöx 1260 WK: 2x Savöx 1250 or Savöx 1260
- 130Ah controller
- Power supply when the controller is without BEC
- Receiver