Aeronaut Z-Spinner 38 mm 725174

Aeronaut Z-Spinner 38 mm 725174

Item number: 725174
EAN: 4012230117294

The Z-Spinners combine the advantages of the CN-Spinners (Cool Nose with cooling air openings) and the cranked Z-center pieces. The angled aluminum center sections allow the folding propeller blades to fit even closer to the fuselage, providing less drag during soaring. The spinners with the center pieces are designed for slim E-sailplane fuselages, but can also be advantageous for wooden fuselages of box construction, for example, if they are ground round.

The centerpieces of the spinner sizes 38,40 and 42mm are interchangeable, so e.g. 38mm spinner caps can be operated with the centerpiece of 42mm spinners. These combination options provide further optimization potential, as they allow finer tuning to the respective fuselage. The 30mm spinner has its own centerpiece that cannot be combined with the other spinner caps.

The Z-Spinner contains a spinner cap (diameter 30mm) made of white plastic (very good paintable), milled aluminum center piece with integrated receptacle for clamping cone, special prop rubber for folding the propeller blades, mounting screws for spinner cap and propeller blades.

The diameter of the spinner cap is 38 mm. The center distance (d) is 32 mm for this spinner. This means that the diameter of the propeller blades is reduced by 10 mm (0.39?). Example: A propeller with 12? diameter effectively has a diameter of 11.61? (the size specifications for folding propellers always refer to the use of a center piece with center distance d=42 mm).

Scope of delivery:
- Spinner cap made of white plastic type Coolnose
- Milled aluminum center piece with integrated mounting for clamping cone (available separately)
- Mounting screws for spinner cap and propeller blades
- Matching special prop rubber for folding the propeller blades

extra info:
The following matching collets are required for this spinner series:
- Collet cone motor shaft 2,0mm - order no. 7123/00
- Clamping cone motor shaft 2,3mm - Order No. 7123/01
- Clamping cone motor shaft 3.0mm - Order No. 7123/02
- Clamping cone motor shaft 3,2mm - Order-No. 7123/03
- Clamping cone motor shaft 4,0mm - Order-No. 7123/04
- Clamping cone motor shaft 5,0mm - Order-No. 7123/05
- Tension cone motor shaft 6,0mm - Order-No. 7123/06

The prop rubber for this spinner is available as a spare part separately under part number 7251/65 (for 30mm spinner) and 7251/66 (38-42mm spinner).