MIBO Touch Duo Racing AC/DC 400W Charger/Discharger MB-4801

MIBO Touch Duo Racing AC/DC 400W Charger/Discharger MB-4801

Item number: MB-4801/870122
EAN: 8596450043114

MIBO Touch Duo Racing AC/DC 400W is a dual-channel charger-discharger with touchscreen display. It also features a balancer with a capacity of up to 200W per channel for all battery types (NiMH, NiCd, LiPo, LiHV, Li-ion, LiFe and lead batteries). The charger can be powered from a 100-240 V/50-60 Hz mains supply or a 12 V car battery or a suitable stabilised power supply.
The MIBO Touch Duo Racing is equipped with an intelligent and user-friendly software that offers many useful functions and includes

- a programme for new "high-voltage" LiHV batteries with a terminal voltage of up to 4.35 V
- the final voltage setting for charging and discharging lithium batteries (enables gentle charging, preferred by aviators, or overcharging, which is popular in the car scene.
- the final voltage setting for charging and discharging lead-acid batteries (enables safe and optimal charging of all types of lead-acid batteries).
- measurement of the total voltage and the individual voltage of each cell (for lithium batteries) even without charging/discharging
- a MicroUSB port for firmware updates
- with mains supply, both channels can also serve as a stabilised power supply of 0.1-28 V with an adjustable current limiter of 0.1-20 A (up to 200 W)
- Charging of intelligent batteries for drones (3S LiPo, 4S LiHV, 6S LiHV)

Basic functions and parameters at a glance:
- Input voltage 10-30 V DC - for full charger performance, the power supply must be at least 24 V.
- Mains supply 100-240 V/50-60 Hz
- Charging and discharging of 1-15 NiCd/NiMH cells, 1-6 Li-Ion/LiPo/LiFe/LiHV cells or 2-20 V lead-acid batteries
- Adjustable charging current (0.1-20.0 A) in 0.1 A steps
- Adjustable discharge current (0.1-5.0 A)
- With mains voltage, the charging channels can be divided (2x 200 W, 1x 400 W, 300 W/100 W, 100 W/300 W)
- Max. Discharge power of 25 W per channel
- Automatic charge and discharge mode for NiCd and NiMH with adjustable current limit
- Charge termination with delta-peak method for NiCd and NiMH batteries
- Lithium and lead batteries are charged according to the "constant current/constant voltage" method
- Adjustable sensitivity of delta-peak detection for NiCd and NiMH batteries
- Adjustable final voltage for charging and discharging lithium and lead batteries
- Repeatable charge/discharge or discharge/charge cycle for NiCd and NiMH batteries, up to 5 cycles
- Three charging modes for lithium batteries - normal charge, symmetrical charge, charge / discharge from battery.
- Termination of charging when the set time or charging voltage is exceeded.
- Memory for 8 charge/discharge programmes.
- Measurement of total pack voltage and individual cell voltage (for lithium batteries).
- Measurement of the total internal resistance of the pack and the individual cell resistance (for lithium batteries).
- For mains supply, it is possible to use both channels as a stabilised power supply with an output voltage of 0.1-28 V with an adjustable current limit of 0.1-20 A (max. according to the assigned power for the channel) to supply other electrical devices
- Programs for charging smart drone batteries (3S LiPo 11.1 V, 4S LiHV 15.2 V and 6S LiHV 22.8 V)
- Micro USB port for firmware updates from PC and charger
- USB output 5.0 V/2.1 A for powering/charging mobile phones, tablets and similar devices
- Backlit LCD touch screen with simple and intuitive menu and parameter display while charging/discharging
- A range of warning messages contribute to safe operation - incorrect input voltage, reverse polarity at input, unsuitable battery or accumulator condition, incorrect polarity at output
- Protection against reverse polarity and short circuit at the output.
- Compact aluminium housing
- Built-in fans for forced cooling

The charger is equipped with XT60 sockets on both channels and comes with 2 JST-XH service adapters that allow direct connection of power cables and JST-XH connectors of 2-6S LiPo packs. If you use packs with XT60 and JST-XH connectors, you do not need an additional charging cable. You can use common Sky RC or RC system adapters to connect service connectors from other systems.

Scope of delivery:
- MIBO Touch Duo Racing charger
- 2x XT60/XT60+Dean-T charging cable
- 2x JST-XH Balancer Adapter 2-6S
- 2S LiPo hardcase charging cable
- 4mm banana/XT60 power cable
- Power cable
- User Manual