FUTABA Servo BLS671SV MG BB 0,10s/8,3kg 6,6-7,4V SBUS.2 FPBLS671SV

FUTABA BLS671SV HV SB2 0.10s/8.3kg SBL671SV

Item number: SBL671SV / BLS671SV
EAN: 4513886025624

DESCRIPTION
Very fast and powerful steering servo for 1:12 RC cars, with brushless motor. Despite its slim 15 mm thickness, this servo offers an enormous torque of 83 Ncm. Robust metal gearbox with double ball bearings. Ideal steering servo for competition RC cars. Suitable for direct operation with 2S LiPo batteries.

Advantages of brushless motor technology:
- 30% shorter response time
- Better acceleration

- More resistant to vibrations and shocks
- High efficiency, therefore less motor heating
- No carbon brush wear, thus 5 times longer motor service life
- Special gearbox with maximum freedom from backlash
- Cobalt samarium motor magnets
- Highest resolution
- Same power consumption as conventional digital servos

Programmable thanks to S.BUS technology! Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The servos can be addressed in various ways:

1. via the S.BUS receiver
2. with the handy SBC-1 programmer
3. via the PC-Link software with the CIU-2 USB adapter
4. at the S.BUS connection of the transmitter

The following parameters can be configured:
- S.BUS channel assignment
- Servo polarity
- Servo type (normal / retractable landing gear)
- Soft start (on / off)
- Mode selection for signal failure Hold or Free
- Soft servo run (On / Off)
- Servo position (servo tester)
- Servo centre adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39...9 seconds per 45 degrees
- Deadband setting (dead band)
- Servo travel adjustment left and right separately, approx. 50...175%
- Starting power
- Damping
- Holding force
- ID storage

Note:
To utilise the speed of the Futaba SR system, many FUTABA SV servos can be switched to SR mode using the T7PX or T7XC transmitter. The following servos are currently SR compatible:
BLS371SV, BLS471SV, BLS571SV, BLS671SV, BLS671SVi, BLS373SV, S9372SV and S9373SV.

FEATURES:
- Powerful S.BUS2 digital servo with metal gearbox
- SR mode
- Hi-Voltage
- Brushless motor
- Ball bearings
- Robust plastic housing
- High resolution
- High return accuracy
- Low-wear potentiometer
- Water-protected

TECHNICAL DATA
- Operating voltage: 4.8 - 8.4 V
- Actuating speed 60° (7.4 / 6.6 V): 0.10 / 0.11 s
- Actuating torque (7.4 / 6.6 V): 8.3 / 7.4 kgcm
- Control frequency: 50...300 Hz
- Dimensions: 33x15x27.1 mm
- Weight: 28 g

Scope of delivery:
1x servo BLS671SV HV SB2 with accessories bag