Futaba BLS-A600 Mini Servo (6,7kg 0,09s/60°)

Futaba BLS-A600 Mini Servo (6,7kg 0,09s/60°)

Artikel-Nr: F-BLS-A600
EAN: 4513886038488

Very strong and fast digital HV micro servo with AC motor, ball bearings, and metal gears, ideal for glider wings. Support for S.BUS and S.BUS2. Power supply 4.0-8.4 V. Pulling force 6.0 kg/cm, speed 0.10 s/60° at 6.6 V, pulling force 6.7 kg/cm, speed 0.09 s/60° at 7.4 V. Weight 28 g.

Very strong and fast programmable digital S.BUS2/S.BUS micro servo with metal gears and output shaft in two ball bearings, ideal especially for gliders and electric airplanes as well as other applications that require high pulling force and speed with small dimensions and low weight.

The BLS-A600 can be connected to the outputs of S.BUS 2 receivers (serial bus with bidirectional communication) or S.BUS receivers (serial bus with unidirectional communication) or function as a classic servo connected to the channel output (PWM) of the receiver.

With the help of the CIU-3 USB interface and the S-Link PC program or a Futaba transmitter with S.BUS servo adjustment function, you can program a whole range of servo parameters (speed, deflection size, neutral position, overload protection, soft start, etc.). The channel setting for operation on the S.BUS2/S.BUS bus is only possible with the help of the transmitter.

Increased supply voltage 6.0-7.4 V (nominal voltage), operating voltage range 4.0-8.4 V.

What is S.BUS2/S.BUS
S.BUS - Futaba serial bus with unidirectional communication for controlling servos, controllers, switches, gyroscopes, and other compatible RC devices connected to a single S.BUS output of the receiver.
S.BUS2 - Futaba serial bus for bidirectional communication, which (like S.BUS) enables the control of servos, controllers, switches, gyroscopes, and other compatible RC devices connected to a single S.BUS2 output/input port of the receiver. In addition, it allows the connection of telemetry sensors and the transmission of the data they collect via the receiver to be displayed on the transmitter. Some S.BUS2 servos can transmit information about operating current, temperature, or the angle of the servo output lever to the transmitter.

Unlike classic RC sets, the S.BUS(2) system uses serial data communication to transmit control signals from the receiver to servos, gyroscopes, or other devices. This data contains commands such as "move servo channel 3 to position 15 degrees, move servo channel 5 to position 30 degrees" for multiple devices. S.BUS(2) devices only execute commands assigned to their own set channel. For this reason, it is possible to connect multiple servos to the same signal cable and still adjust and control them individually as needed. This is where the servo's identification code (ID) comes into play. You can find the ID on the sticker on the servo's packaging.
The S.BUS2 servo can be connected to both the S.BUS2 and S.BUS ports of the receiver. Its function is determined by the channel setting in the servo memory (this is done via the Futaba transmitter's programming interface, the SBC-1 programmer, or the USB interface CIU-3 with the PC program S-Link – in some servos, the channel can only be set with the help of the transmitter).
An S.BUS2 servo connected to the channel output of a classic receiver (PWM) functions like a classic servo. Its movement is determined by the signal in the channel of the receiver to which it is connected. The setting of the programmable servo functions remains valid.

Technical specifications:
- Servo size: Micro
- Servo type: Digital
- Actuation force at 6.6V [kg∙cm]: 6
- Speed at 6.6V [s/60s]: 0.1
- Actuation force at 7.4V [kg∙cm]: 6.6
- Speed at 7.4V [s/60s]: 0.09
- Servo gear: Metal
- Ball bearings: 2× High voltage: Yes
- Power supply [V]: 4 - 8.4
- Length [mm]: 27.2 Width [mm]: 13
- Height [mm]: 30.5 Weight [g]: 28
- Intended for: airplanes, helicopters, ships
- S.BUS: Yes
- S.BUS2: Yes


Information Produktsicherheit
Information on product safety
 
Hersteller-Manufacturer:
FUTABA CORPORATION
1080 Yabutsuka
Chosei-Mura, Chosei-gun, Chiba-ken
299-4395 Chosei
info@m.futaba.co.jp

EU-Bevollmächtigter:
EU authorized representative:
KAVAN Europe s.r.o.
Doubravice 110
533 53 Pardubice
Tschechien
+49 8374 259 2696
info@kavanrc.com