Not available any more!!! archive items Futaba Servo S9071SB 0,11s/4,6KG

FUTABA Servo S9071SB BB 0,11s/4,6kg

Item no.: 01000851 S9071SB
EAN: 4513886019609

S-BUS digital servo with bell armature motor, small, fast and yet powerful. The gearbox has double ball bearings and is coupled to the special potentiometer with 6-position wiper via an indirect-drive system. Main application of this servo is the swashplate control of micro and mini helicopters, but it can also be used everywhere where power and speed are needed with small dimensions.

Programmable by S.BUS technology! Of course all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The addressing of the servos can be done in different ways:

1. via the S.BUS receiver
2. with the handy SBC-1 programmer
3. via the PC-Link software with the USB adapter CIU-2
4. at the S.BUS connection of the transmitter

The following parameters can be configured:
- S.BUS channel assignment
- Servo reverse polarity
- Servo type (Normal / Retract)
- Soft start (On / Off)
- Mode selection in case of signal failure Hold or Free
- Soft servo run (On / Off)
- Servo position (Servo tester)
- Servo center adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39...9 seconds per 45 degrees
- Deadband adjustment (deadband)
- Servo travel adjustment left and right separately, approx. 50...175%.
- starting power
- damping
- holding force
- ID storage

Features:
- Powerful S.BUS digital servo with plastic gearbox
- Coreless motor
- Ball bearing
- Robust plastic housing
- High resolution
- High repeatability
- Low wear potentiometer

Technical data
- Operating voltage: 4.8 - 6.0 V
- positioning speed 60° (6.0 / 4.8 V): 0.11 / 0.15 s
- actuating torque (6.0 / 4.8 V): 4.6 / 3.8 kgcm
- Control frequency: 50...300 Hz
- dimensions: 35,5x15x28,6 mm
- Weight: 25 g

Scope of delivery:
- 1pc. Servo Futaba S9071SB 0,11s/4,6kg with accessories bag

Translated with www.DeepL.com/Translator (free version)