14020 Servo Coyote 4,8-8,4V 23x12x27mm

Graupner 14020 Servo Coyote 4,8-8,4V 23x12x27mm

Small fuselage? No probelm!

The Coyote Servo is a 12 mm servo with full aluminum housing and metal gears for the highest demands when you need speed in small format. The servo has very good torque and stall force for its size. It has a very high speed at these values.
The servo connection cable has a length of 300 mm and is ideal for installation in small helicopters without having to extend the cable. The servo can also be used in F3b models as V-tail servo.

The housing and the output gear (25T) are adapted to today's standard dimensions.

The servo arm is screwed with an M2
hexagonal socket screw.


Included in the set:
- 1 x Servo
- 1 x Hardware pack
- 1 x Aluminum servo arm
- 1 x High quality "Controlled by the wild" sticker

Specification:
- Torque at 4.8 V, approx. [Ncm]: 26 Ncm
- Width [mm]: 12 mm
- No-load current drain: 20 mA
- Transit speed at 4.8 V, approx. [Sek / 40°] : 0.08 Sek/40°
- Holding torque 6.0V, approx. [Ncm]: 74 Ncm
- Charging rate at 4.8 V approx. [mA]: 1300 mA
- Height [mm]: 27 mm
- Transit speed at 6.0 V, approx. [Sek / 40°] : 0.07 Sek/40°
- Weight [g]: 22 g
- Transit speed at 7.4 V, approx. [Sek / 40°]: 0.05 Sek/40°
- Torque at 6.0 V, approx. [Ncm]: 32 Ncm
- Holding torque 7.4V, approx. [Ncm]: 95 Ncm
- Overall length [mm]: 23 mm
- Charging rate at 6.0V approx. [mA]: 1600 mA
- Dimensions [LxWxH in mm]: 23 x 12 x 27 mm
- Holding torque 4.8V, approx. [Ncm]: 58 Ncm
- Torque at 7.4 V, approx. [Ncm] : 40 Ncm
- Bearings: 2 Ball-Bearing
- Charging rate of 7.4 V approx. [mA]: 2000 mA
- Gear unit: Both mg
- Operating voltage neutral [V] : 4...8.4 V
- Neutral impulse: 1.5 ms
- Max. operating frequency [ms / Hz]: 330 ms / Hz
- Field of application: Flugmodelle, Heli, Copter, Cars, Boats
- Coreless: +
- Length [in]: 0.91 in
- Torque at 7.4 V, approx. [kg.cm] : 4 kg.cm
- High [in]: 1.07 in
- Torque at 6.0V, approx. [oz.in] : 3.2 oz.in
- Width [in]: 0.47 in