POWER PEAK INFINITY 3 BID

8429 POWER PEAK INFINITY 3 BID

Intelligent high - charge - discharge station generation with convenient battery management, for charging and discharging NC, NiMH, lead, lithium and lithium-ion polymer batteries. The maximum cell count is 30 NC / NiMH cells and 12 LiPo cells, with a maximum charge current of 10 A, depending on the number of cells.

In addition to the modes of loading, unloading and cycle for the various battery types are also different charge processes are available. For example, normal for NC / NiMH batteries between the -, linear - and reflex charging method should be chosen.

A large, backlit graphic display shows the main parameters of the current procedure in numerical and are shown graphically on the display. The user can clearly observe and control the process. Navigation through the setup menus are easily and conveniently using the 3-D hotkey to the menu system can be switched to German, English, French, Italian or Spanish.

An important feature of the Infinity 3 is the pioneering Battery Identification (BID). The variety of different battery types is growing, and each battery type requires its 'own' specific charge process. The revolutionary BID system provides an ingenious solution to this problem and makes the operation extremely safe and easy.

Lithium batteries for the CC-CV charge and cut-off process. In addition, by connecting the TOP Equalizer (6S No. No. 8488 or 12S. 8484) graphed sensor equalizer with individual cell voltages of the battery as a numerical value or the display of the Infinity 3rd
For safety, the temperature of a battery during a process are monitored and displayed. Even a shutdown at a certain temperature can be preset. The corresponding sensor is included.

An integrated PC interface and the interface cable no. 8295, the data can be displayed graphically and numerically on the PC, stored, compared and printed. The required software is Logview as Donationware freely available for download.

The charger features two independent charge outputs, intended for drive and flight batteries (OUT 1) and transmitter / receiver batteries (OUT 2).
Technical data:
Input Voltage: 11V ... 15V
Shutdown: automatic
Trickle charge: -500 mA
Dimensions: 155 x 143 x 56 mm
TX-RX output: 4-8NC/NiMH, 2A
Weight: 580 g
Charging current: 0.1 ... 10 A
NC cells: 1 .. 30 cells NiCad / NiMH, 1 .. 12 LiPo cells, 1 .. 6 and 12-cell lead-acid battery

more Specifications:
Operating voltage: 11V ... 15V DC (12V lead acid battery or a high-performance power supply, no charger for car batteries!)
Out 1:
Cells:
1 ... 30 NC / NiMH cells,
1 ... 12-cell lithium polymer
'1 ... 6 and 12-cell lead-acid battery
Charging current:
0.1 ... 10 A (depending on the number of cells)
Discharge:
0.1 ... 5 A
Final discharge.:
'0, 1 ... 1.1 V per cell (NC / NiMH batteries)
2.5 ... 3.7 V per cell (LiPo) batteries
1.8 V per cell (Lead-acid batteries)
Trickle charge:
0 ... 500 mA, adjustable in 50 mA increments for NC / NiMH'Akkus, C/20 with BID chip
Shutdown:
NC / NiMH batteries: automatic, digital Delta-Peak system
Switch-off: '5 ... 25 mV per cell NiCad batteries
3 ... 15 mV per cell NiMH batteries or zero peak
LiPo / Lead-Acid Batteries:
Automatic, using CC-CV process
Temperature shutdown:
10 ... 65 ° C, adjustable in 1 ° C increments
Capacity monitoring:
10 ... 150%, adjustable in steps of 10% (NC / NiMH batteries)
10 ... 120%, adjustable in 10% increments (LiPo / Lead-Acid Batteries)

OUT 2:
Cells:
Shop 1-8 cell NiCd / NiMH (autom.Zellenzahl recognition)
Charging current:
0.1 to 2.0 A in 0.1 A steps, either manual or automatic with Delta-Peak cut-off