Gyro Reciever HoTT Falcon 12

Graupner S1035 Gyro receiver HoTT Falcon 12

Graupner Falcon 12 HoTT receiver with 3-axis gyro (6-channel) S1035
With the Falcon 12, Graupner presents a powerful 6-channel receiver with an integrated 3-axis gyro and 3-axis acceleration sensor (A-meter).

With the GRAUPNER HoTT 2.4GHz technology, the receiver has a secure hopping telemetry transmission high-frequency section with high-quality components and the latest software. Without additional sensors, the receiver transmits the parameters "receiver voltage", "receiver temperature" and "signal strength" to the transmitter.

The new antenna amplifier ensures a longer range despite the single antenna. The faster 32-bit L4 processor guarantees energy-saving work and the higher performance ensures that the Falcon 12 can also be used as a flybarless system for helicopters and as a flight controller for multicopters. Of course, the integrated Falcon gyro system can also be used perfectly for surface models. There are different gyro modes: OFF, normal stabilization, heading lock and rotation rate mode which ensures particularly easy knife flight and simple torquing and supports the pilot. Extremely quick, easy and conveniently adjustable via the Hott transmitter telemetry menu.

Just like its namesake, the falcon, the Falcon 12 embodies determination, strength and precision. Go hunting for the perfect flight with the Falcon.

Surface models
• Stabilization of the flight model in difficult wind conditions for up to 3 axes
• Natural flight behavior through proportional gyro suppression
• The 3-axis gyro makes it easy to fly aerobatic models that are difficult to master and aerobatics are extremely simplified
• Flight figures can fly much cleaner
• 3 different gyro modes: OFF, normal stabilization, heading lock and rotation rate mode for particularly easy knife flight and simple torquing
• Easy setting of the gyro assignment
• Setting the parameters via HoTT telemetry
• Software with position mode available for the HoTTrigger 1400 and V-Venture, enables easy landings even in difficult wind conditions

Flybarless system for helicopters
• Basic setting carried out in a few minutes
• Fast and innovative axis assignment, thus flexible installation direction
• Extremely space-saving due to the size, weight and omission of cables, making it easy to accommodate
• Specially vibration-insensitive 3-axis sensors of the latest generation
• Pirouette optimization of the swashplate and direction of the rear torque compensation are automatically recognized
• All common helicopter swash plates 90/120/135/140 degrees
• Adjustable swashplate rotation up to 90 degrees for multi-blade heads
• Clear standard and selectable expert menu if required
• Sensitivity parameters during flight to speed and style can also be adjusted depending on flight phase via encoder
• Super fast by eliminating the transmission time from the receiver to the flybarless system
• Very direct control feeling

Flight control for copter
• The copter software Q06 is installed on the receiver by a software update
• Basic setting carried out in a few minutes via the telemetry menu
• Fast and innovative axis assignment, thus flexible installation direction
• Specially vibration-insensitive 3-axis sensors of the latest generation
• The housing protects the electronics in the event of a crash. The special double-sided tape additionally dampens the vibrations.
• 8kHz gyrofrequency, multishot and fast PID control routines as well as new software filters ensure a perfect flight experience.
• Also new is the Quadrotype XI (Quadrocopter X with reverse prop direction of rotation), which has proven itself especially in FPV races,
• so that the lens remains free and the props turn away from the obstacle.
• When connecting the GPS sensor S8437 to K5 / telemetry and setting K5 to SENSOR, the following additional functions are available: GPS with altitude control, come home and fly waypoints (with HoTT Viewer 2 app and USB OTG cable).
• Telemetry support for our own Hott sensors and Hott sensors from other providers
• SUMD output for other flybarless receivers.
• Voltage input for ext. Voltage divider, e.g. B. already contained in the controllers S3082 and S3083.
• HV compatible. Input voltage range 3.6 ... 12.6 V
• Can be programmed and operated with all previously available HoTT transmitters with telemetry

Flybarless for helicopters

• Easy programming of the basic settings via telemetry.
• The pirouette optimization is determined automatically from the parameters and works extremely well.
• Extreme flight stability with simultaneous full 3D suitability even with the basic settings.
• Effect for rear and swashplate can be easily adjusted via the telemetry menu or via selectable sensors.
• Further optimization options in expert mode for personal flight style and personal